LED Lighting With Bluetooth Audio bt audio
The model AG-0505 of LED lighting with Bluetooth audio combines LED energy-saving lighting and sound technology together. The outer ring is the ring luminescence band, which can brighten the light of warm white or cool white. A small-caliber and high-powered full-range speaker is located in the middle area, and music player rise well. Bluetooth audio receiver is suitable for all kinds of products with Bluetooth, such as mobile phone, MID, notebook etc.
Technical indicator
No. Item Data Condition
1 Output voltage(AC) 90~245V 50/60Hz
2 Input power(Po) ≤15W 220V/50Hz
3 Power factor(PFC) ≥0.9
4 Power efficiency(η) ≥82% 220V/50Hz; Work at full capacity
LED lighting indicators
5 Source power(Pw) ≤4.5W
6 Luminous flux(Lm) ≥500
7 Color rendering index(CRI) ≥0.7
8 Color temperature(K) 5500-6000
9 Light decay(If) ≤3% 3000H; Ta=25°
10 Illumination angle(°) ≥160
11 Dimming 32-step digital
Audio amplifier indicators
12 Audio output power(PL) 3W F0=1KHz; PL=1W
13 Frequency response(F) 20-20KHz PL=1W;
Unevenness+/-3dB;
14 Signal to Noise Ratio(SNR) ≥80dB PL=3W; A-weighted
15 Audio distortion(HTD+N) ≤0.5% PL=1W; F=1KHz
16 Volume control 32-step digital
17 Bluetooth transmission distance ≥10M No obstacle
18 Infrared control distance ≥10M No obstacle
Use of environmental indicators
19 Application Environment(°) -20~60
20 Storing Environment(°) -40~70
Instructions of use
1.1 Each package contains a host of LED lighting with Bluetooth audio, an infrared remote control, manual and warranty card;
1.2 Open the box, and remove the host and the remote control;
1.3 Turn off the switch, screw the host into E27 socket, and tighten it a little harder. Turn on the light LED lights after around 1 second (brightest state). At this time, the audio features in the standby state.
1.4 Remove the insulating film in the battery compartment of remote control, the power of remote control is energized. At this point, the host can be controlled by the function keys on the remote control.
1.5 Hold down the Bluetooth pairing key to be when you see the blue color flash on the host, release the button. At this point, the Bluetooth of host is in pairing. Open the Bluetooth device which need connect find automatically to be a “LA-5050” Bluetooth devices display, connect the matching. When blue LED of the host light and dark flash slowly, the Bluetooth pairing is successful.
1.6 The host will remember automatically the connected device without matching again, after pairing is successful. When access to the new Bluetooth device, repeat the 3.5 process. The host will record the last paired device automatically.
