公司私模 1000ma(毫安)数码播放器。mp4、mp5通用充电器
足量、足安。价格实惠!!货源供应稳定!
PART NO. C688-1468 MODEL NO.GFP051-0510-1 V:A1 DATE:2010/7/7 | ||||
1.INPUT REQUIREMENT | ||||
2.OUTPUT SPECIFICATION | ||||
3.MECHANICAL | ||||
4.RELIABILITY | ||||
5.ENVIRONMENT | ||||
6.OUTLOOKING | ||||
7.SAFETY | ||||
8.QC CHECK | ||||
9.DIMENSION | ||||
10.LABEL | ||||
11.PACKING | ||||
Page 1 |
PART NO. C688-1468 MODEL NO.GFP051-0510-1 V:A1 DATE:2010/7/7 | |||||
1.INPUT REQUIREMENT | |||||
ITEM | SPECIFCATION | MIN | TYP. | MAX | |
NORMAL AC INPUT VOLTAGE | SINGLE PHASE | 100Vac | 110Vac/220Vac | 240Vac | |
AC INPUT VOLTAGE RANGE | SINGLE PHASE | 90Vac | 110Vac/220Vac | 264Vac | |
AC INPUT FREQUENCY | SINGLE PHASE | 47Hz | 50/60Hz | 63Hz | |
AC INPUT CURRENT | TYPICAL INPUT VOLTAGE& OUTPUT AT FULL LOAD. | 200mA | |||
AC INRUSH CURRENT | TYPICAL INPUT VOLTAGE& OUTPUT AT FULL LOAD , 25℃. | 30A | |||
EFFICIENCY | TYPICAL INPUT VOLTAGE& OUTPUT AT FULL LOAD | 65% | |||
2.OUTPUT SPECIFICATION | |||||
ITEM | SPECIFCATION | MIN | TYP. | MAX | |
NORMAL DC OUTPUT VOLTAGE | 5Vdc | ||||
DC OUTPUT VOLTAGE RANGE | TYPICAL OUTPUT VOLTAGE ±5% | 4.75V | 5.25V | ||
LOAD CURRENT RANGE | 0.0A | 1A | |||
PEAK LOAD CURRENT | TIME<60S | 1.3A | |||
RIPPLE | TYPICAL INPUT VOLTAGE , TYPICAL LOAD CURRENT , 25℃ | 120mV | |||
HOLD-UP TIME | AT TYPICAL INPUT VOLTAGE AND FULL LOAD | 10mS | |||
TURN-ON DELAY | TYPICAL INPUT VOLTAGE AND TUP LOAD CURRENT | 1S | |||
OVER CURRENT PROTECTION | AUTO RECOVERY | ||||
SHORT CIRCUIT PROTECTRON | THE ADAPTER SHALL NOT DAMAGE BY SHORT THE DC OUTPUT TO GROUND | ||||
OVER VOLTAGE PROTECTION | 6V | 7.5V | |||
*TEST MEASURES | |||||
C1:0.1uF CERAMICS CAPACITOR | |||||
C2:10uF 50V ALUMINUM CAPACITOR | |||||
Page 2 |
PART NO. C688-1468 MODEL NO.GFP051-0510-1 V:A1 DATE:2010/7/7 | ||||
3.MECHANICAL | ||||
ITEM | SPECIFICATION OR TEST CONDITION | ACCEPTANCE CRITERIA | ||
BENDING TEST | NORMAL TEMPERATURE | NO SHORT CIRCUIT | ||
THE CORD SHALL WITHSTAND WEIGHT OF 200g, SWINGING FROM | NO BREAKAGE OF THE CORD | |||
LEFT TO RIGHT AT AN ANGLE OF 60 DEG. 1000CYCLE TIMES MIN. | ||||
S/R SHALL WITHSTAND WEIGHT OF 1N. SWINGING FROM LEFT TO | ||||
RIGHT AT AN ANGLE OF 60DEG. 1000CYCLE TIMES MIN. | ||||
BENDING SPEED 40CYCLE/MINUTE | ||||
VIBRATION | FREQUENCY RANGE:10~55Hz | THERE SHALL BENO | ||
AMPLITUDE:1.5mm | ABNORMALITY ON THE | |||
ACCELERATION: 1G | APPEARNCE STRUCTURE | |||
SWEEP 1 MINUTE FOR X,Y,Z,AXIS EACH | AND OPERATING | |||
4.RELIABILITY | ||||
ITEM | TEST CONDITION | ACCEPTANCE CRITERIA | ||
TEMPERATURE UP WITH | TEST AT SURFACE OF THE CASE WITH TYPICAL | TEMPERATURE UP UNDER | ||
TYPICAL LOAD | AC INPUT AND TYPICAL LOAD IN OUTPUT | 35 DEGREES | ||
50/60Hz | ||||
HI-POT TEST | INPUT TO OUTPUT | NO DAMAGE | ||
GRADUALLY RAISED FROM 0 TO THE 3000Vac AND HELD AT THAT VALUE FOR 3S,5mA | ||||
INSULATION RESISTANCE | INPUT TO OUTPUT,DC 500V | >100MΩ | ||
MTBF | TYPICAL INPUT&FULL LOAD , 25℃ | 50000 HOURS | ||
LIFE | TYPICAL INPUT&FULL LOAD, 40℃ | 1YEARS ABOVE | ||
TYPICAL INPUT&FULL LOAD, 25℃ | 2YEARS ABOVE | |||
BURN-IN | AT 30℃(±10℃),NORMAL INPUT VOLTAGE | 2~4 HOURS | ||
5.ENVIRONMENT | ||||
ITEM | SPECIFICATION OR TEST CONDITION | min. | typ. | max. |
OPERATING TEMPERATURE | 0℃ | 40℃ | ||
STORAGE TEMPERATURE | -20℃ | 85℃ | ||
OPERATING HUMIDITY | NON-CONDENSING | 5%RH | 90%RH | |
STORAGE HUMIDITY | NON-CONDENSING | 5%RH | 90%RH | |
Page 3 |
PART NO. C688-1468 MODEL NO.GFP051-0510-1 V:A1 DATE:2010/7/7 | |||||
6.OUTLOOKING | |||||
DIMENSION | :64(L)X48(W)X22.5(H)mm | ||||
WEIGHT | :ABOUT 54g | ||||
AC INPUT TYPE | : WALL MOUNT | ||||
DC OUTPUT TYPE | : USB AF 4PIN | ||||
Bitmap | |||||
DC OUTPUT CABLE | |||||
INDICATION | :LABEL | ||||
CASE MATERIAL | :94V-0 ABS+PC | ||||
PCB MATERIAL | :94V-0 | ||||
7.SAFETY | |||||
COMPLY SAFETY STANDARDS | STANDARD | FILE NO. | |||
UL CUL PSE | E60950 | ||||
EMI | |||||
FCC CE | |||||
8.QC CHECK | |||||
ALL OF THE QUANTITY SHALL BE CHECKED BEFORE SHIPMENT,CHECK ITEM AS BELOW: | |||||
(1)DC PLUG POLE CHECK | |||||
(2)OCP FUNCTION CHECK | |||||
(3)DC OUTPUT VOLTAGE CHECK | |||||
(4)HIPOT&INSULATION CHECK | |||||
(5)OUTLOOKING CHECK | |||||