组合轴承滚针组合轴承ZARF40100LTN,ZARF40100-L-TV组合轴承
'
| | | |
| | | | | | 6) | | | | Mounting dimension for seal carrier assembly DRS.
Seal carriers: see under "Accessories". |
| | B | 11 mm | | | B1 | 27 mm | | | B2 | 12 mm | | | C | 18 mm | | | C1 | 10 mm | | | D1 | 65 mm | | | D2 | 50 mm | | | D3 | 63 mm | | | Da max | 66 mm | | | Mounting dimensions
If rotary shaft seals are used, the outside diameter of the sealing ring must be taken into consideration. |
| | d1 | 3,2 mm | | | da min | 48 mm | | | Mounting dimensions
If rotary shaft seals are used, the outside diameter of the sealing ring must be taken into consideration. |
| | H3 | 51 mm | | | J | 80 mm | | | r1 min | 0,6 mm | | | rmin | 0,3 mm | |
| | | | m | 1,45 kg | | | Ca | 59000 N | | | Basic dynamic load rating, axial |
| | C0a | 163000 N | | | Basic static load rating, axial |
| | Cr | 27500 N | | | Basic dynamic load rating, radial |
| | C0r | 53000 N | | | Basic static load rating, radial |
| | nG Öl | 4400 1/min | | | Limiting speed for oil lubrication (valid only with adequate oil cooling) |
| | nG Fett | 1600 1/min | | | Limiting speed for grease lubrication |
| | MRL | 1 Nm | | | Bearing frictional torque |
| | caL | 2800 N/µm | | | ckL | 1030 Nm/mrad | | | Mm | 4,35 kg x cm^2 | | | Mass moment of inertia for rotating inner ring |
| | | 1 µm | | | Axial runout
The axial runout data for screw drive bearing arrangements are based on the rotating inner ring. |
| | | 8 x M8 | | | Quantity x size of fixing screws to DIN 912-10.9
Tightening torque of fixing screws according to manufacturer\'s data.
Screws not included in delivery. |
| | | ZMA40/62, AM40 | | | Designation of recommended INA locknut |
| | MA | 55 Nm | | | Tightening torque
Only valid in conjunction with INA precision locknuts |
| | | 14240 N | | | DR | 50x65x8 | | | Rotary shaft seal to DIN 3760
To be ordered separately. |
| | | | | | Locknuts, rotary shaft seal and fixing screws not included in delivery. |
|
|
|
'
