供应FEMTODLPCA-200FEMTO低噪音电流放大器

德国FEMTO公司是一个世界低噪声放大模块的. FEMTO 公司的产品具有很宽的产品范围包括：电流放大器、电压放大器、锁相放大器和光电接收器等。产品主要分为： LCA-2-10T 系列、LCA 系列、HCA 系列、DDPCA 系列、DLPCA 系列、DHPCA 系列、DLPVA 系列、DHPVA系列、DUPVA系列、HVA 系列、HSA 系列、HLVA-100系列、FWPR-20  系列、LCA-S-400K 系列、HCA-S-200M 系列、HCA-S-400M 系列、HSA-X-S 系列、OE-200系列....

可通过RS232接口远程控制,工作方式有高速模式和低噪声模式,增益从1*103-1*1011可调,带宽最高为500KHZ
Transimpedance Gain from 103 to 1011 V/A
Input Noise down to 4.3 fA/√Hz
Bandwidth up to 500 kHz
Rise Time down to 700 ns
Adjustable Bias Voltage
Manual and Remote Control
9级可变增益：10三次方~10的十一次方V/A,超低噪声可达4fA/(Hz)1/2,带宽DC-500khz,可调偏置和Bios,可变交流直流耦合，10Hz低通滤波方便直流测量，数字电脑界面或者远程控制，适用于光电二极管，扫描隧道显微镜、粒子探测器、锁相放大的前级放大、AD转换
The Ultimate Low Noise Current Amplifier
Packed with features the DLPCA-200 variable gain transimpedance amplifier is designed for a wide range of applications that require the conversion of small currents into usable voltages. It is ideally suited, for example, for time resolved current and charge measurements down to the µs region and as preamplifier for photodiodes or lock-in systems. The DLPCA-200 offers variable transimpedance gain from 103 to 1011 V/A allowing the sensitive measurement of currents in the sub-pico to milli amp range. Its switchable AC/DC coupling, 10 Hz low pass filter and adjustable offset control can be used to adapt the amplifier to varying measurement tasks and signal conditions. An adjustable bias voltage connected to the shield of the input socket is provided to optimize the speed and noise performance of external photodiodes connected to the amplifier input.

All functions can be set either manually by switches or through the opto-isolated interface by remote control. All this in a rugged and compact EMI shielded case designed with the user in mind and built to guarantee trouble-free operation even in very rough and noisy environments.
Bandwidth and Frequency Response Independent of Source Capacitance
Unlike other amplifiers available the DLPCA-200 requires no particular adaptation such as frequency compensation for different sources. The gain stays constant and the frequency response is nicely flat even for high source capacitances up to 1 nF. Common issues such as gain peaking or even oscillations are avoided by the careful amplifier design and thorough testing of the units prior to shipment.
In addition the DLPCA-200 provides high speed even for large gain settings. At the highest gain setting of 1011 V/A it provides a 3 dB bandwidth of 1.1 kHz and a 300 µs rise time. For low frequency applications not requiring the full bandwidth the unit has a switchable 10 Hz low pass filter to eliminate wideband noise and thus allowing accurate and ultra low noise DC current measurements down to femto amps.
Applications
Photodiode and Photomultiplier Amplifier
Scanning Tunneling Microscopy (STM)
Spectroscopy
Beam Monitoring for Particle Accelerators / Synchrotrons
Ionization Detectors
Preamplifier for Lock-Ins, A/D-Converters etc.

深圳市博纳德精密仪器有限公司坚持不懈地贯彻“顾客第一”，“技术服务”的宗旨，全力为客户提供售前咨询，售后服务，技术支持和维修。我们承诺:对我方所销售仪器，免费保修一年（人为损坏除外），如超出保修期，我方仍负责对所销售产品的维修服务，具体维修收费只收取零件成本费。 安装调试 我们承诺免费帮助用户对其从我方购买的仪器进行安装调试，免费对使用者进行使用培训服务，并指派专人负责与用户联系售后服务事宜。主要培训内容为仪器设备的基本结构、性能、主要部件的构造及处理，日常使用操作、保养与管理、常见故障的排除、紧急情况处理等。合同签定天内按期交货后，我们会安排在3个工作日内开始进行相关设备安装调试和培训工作。售后技术维护服务 我们将指派专人负责与用户联系售后服务事宜，负责整个系统的正常运行，承担技术支持，包括提供及时的电话技术支持和远程响应、上门服务；设备故障响应时间工作日内不超过4小时，工作日内排除故障时间为8小时，非工作日内排除故障时间为24小时，查找原因，提出解决方案，如仍有问题，我方会及时送达维修中心，直至故障排除，完全恢复正常为止。对我方所销售仪器，如超出保修期，我方仍负责对所销售产品的维护服务。我们还开设售后商务电联技术支持：主要针对一般情况下常见的小故障，在问题不算复杂、或者维护人员对某些技术问题存在疑问时使用。通过电话、传真、EMAIL等的指导方式解决问题。 设备保修期内按照中华人民共和国质量法及相关标准实行三包服务。