Product name

Puff plastisol ink      

State

Paste

Packing

20KG/drum

Storage

12 months in cool place

Application

Suitable for all fabrics which endurable in high temperature of 150-180 degree.

Features

1. High fastness

2. High glossy

3. High softness

4. SGS detecting passed, no phthalate, no heavy metal, no NPEOs.

Mix proportion

White: White plastisol ink 60% + Clear plastisol ink 10% + Puff plastisol ink 30%

Colored: Colored plastisol ink 10% + Clear plastisol ink 60% + Puff plastisol ink 30%

Printing process

1. Printing with clear plastisol ink for 1-2 times (4-6 scrapes per time)

2. Mixing white/colored plastisol ink, clear plastisol ink, puff plastisol ink and stirring them evenly

3. Printing again for 2-3 times.

4. Baking for 1~3 minutes under 150~180℃ to dry it fast.

5. Finish.

Attentions

1.     More puff plastisol ink with lower washing ability.

2.     Basement process is necessary to make good washing ability.

品名

高牢度发泡油墨                    

外观

乳白色糊状

包装

20KG/桶

贮存期

常温下12个月

应用

100%棉、棉/涤混纺、涤纶、深浅色布、牛仔布等各种织物，凡满足以下两点的织物均可使用：

1. 能耐150C～180C；

2. 有透气性，可以使油墨渗透进去。不适合的承印物比如：塑料、金属、玻璃等及经防水处理的尼龙布。

卖点

1. 超强洗水牢度

2. 高亮度

3. 手感柔软

4. 符合美国ASTM对邻苯二甲酸脂和欧盟EN71 Part 3对重金属含量的要求

调配比例

印白色：白油墨60% + 透明油墨10% + 发泡油墨30%

印其他色：彩色油墨10% + 透明油墨60% + 发泡油墨30%

工艺流程

1. 丝网选用100-120目，用丝印硬方刀75度刮印, 以透明油墨打底1-2次，印第一次时用力刮4-6刀

2. 将发泡油墨和其他油墨拌匀印2-3次

3. 用热风枪吹至表干，然后160度焙烘过热15-30秒，不能压烫

注意事项

1. 发泡油墨比例不应太多，否则发泡越高越影响牢度。

2. 印发泡前应先打底，否则没有牢度。