MODEL | PD-15-3.3 | PD-15-5 | PD-15-12 | PD-15-15 | PD-15-24 |
OUTPUT | DC Output | 3.3V | 5V | 12V | 15V | 24V |
Rated Current | 4A | 3A | 1.3A | 1A | 0.7A |
Current Range | 0~4A | 0~3A | 0~1.3A | 0~1.0A | 0~0.7A |
Ripple and Noise | -20~70℃ | <50mV | <50mV | <120mV | <120mV | <120mV |
Note 2 |
Voltage ADJ. Range | 3.0~3.6V | 4.4~5.5V | 10.0~13.0V | 13.8~16.1V | 20.7~26.7V |
Voltage Accuracy | ±2.0% | ±2.0% | ±1.0% | ±1.0% | ±1.0% |
Line Regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load Regulation | ±2.0% | ±2.0% | ±1.0% | ±1.0% | ±1.0% |
Set-up Time | <2.0S (115Vac input, Full load); <1.0S (230Vac input, Full load) |
Hold up Time | >10mS(115Vac input, Full load); >20mS(230Vac input, Full load) |
Temperature Coefficient | ±0.03%/℃ |
Overshoot and Undershoot | <5.0% |
INPUT | Voltage Range | 90Vac~264Vac,127~370Vdc |
Frequency Range | 47Hz~63Hz |
Efficiency ( Typical) | 115Vac input | 70% | 76% | 80% | 82% | 84% |
230Vac input | 71% | 78% | 82% | 83% | 85% |
AC Current (max.) | 0.7A | 0.7A | 0.7A | 0.7A | 0.7A |
2.5A |
Inrush Current (Typical) | <20A@115Vac <40A@230Vac Cold start |
Leakage Current | Input—output:<0.25mA Input—PG:<3.5mA |
PROTECTION | Over Load | 105%~150% of rated output current, Hiccup mode,auto recovery |
Over Voltage | 105%~150% of rated output voltage, Constant Voltage |
Shorted Circuit | Long-term mode, auto recovery |
ENVIRONMENT | Operating amb. Temp. & Hum. | -20℃~70℃; 20%~90%RH No condensing(refer to the derating curve) |
Storage Temp. & Hum. | -40℃~85℃; 10%~95%RH No condensing |
SAFETY &EMC | Safety Standards | UL60950-1; EN60950-1:2006 |
Note 3 | Withstand Voltage | Primary-Secondary:3.0KVac; ≤10mA .Primary-PG:1.5KVac; ≤10mA. Secondary-PG:0.5KVDC;≤10mA. |
| Isolation Resistance | ≥100M ohms |
| EMI Conduction&Radiation | Compliance to EN55022(CISPR22)ClassB |
| Harmonic Current | Compliance to EN61000-3-2,-3 |
| EMS Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11;ENV50204,light industry level,criteriaA |
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) |
Dimension (L*W*H) | 79×51×28.8mm |
Packing | 48PCS/CTN, 10.4KGS, 0.03CBM |
Cooling method | Cooling by free air convection |
NOTE | 1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature. |
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 47uF parallel capacitor. |
3. The SPS is considered a component which will be installed into final equipment. The equipment must be re-confirmed that it still meets EMC directives. |
4. Powerld offer accessories for Din-35 rail bar. Please contact sales staff for details. |