TP20模块化探讨
系统组件包括：

The TP20 is available as either a 5-way or 6-way kinematic touchtrigger

将TP20或者是可以5或6路触发测量的运动
•TP20模块七个模块–笔

probe. Its two piece design comprises a probe body and

彻底调查 。两件设计包括探头体
变体允许优化

detachable stylus module(s), giving the ability to change stylus

分离式测量模块（S），提供改变笔的能力
适合应用性能

confi gurations either manually or automatically without re-qualifi cation

配置手动或自动重新配置无资格
•mcr20模块改变架

of the stylus tips, and provides signifi cant time savings in inspection

该笔小费，和检查提供了显著的节省时间
自动操作

routines.

例程。

A direct replacement for the industry standard Renishaw TP2 probe,

为行业标准RenishawTP2探头直接替换，
•TP20测头系统可以使用的

the TP20 probe system brings a range of new benefi ts to manual and

TP20测头系统带来的一系列新的给付为手动和
用Renishaw的PI4-2，PI7-2或PI 200探头接口

DCC CMM applications, and can easily be retrofi tted to existing TP2

DCCCMM的应用程序，并可以很容易地安装到现有的TP2改造

installations.

装置。

The TP20 can be used on a wide range of Renishaw’s manual or

将TP20可用于范围广泛的Renishaw手册或

motorised probe heads, either by direct mounting using the standard

电动探头，可以通过直接安装使用的标准

M8 thread or, alternatively, by using a PAA adaptor to connect to an

M8螺纹或，或者，通过使用PAA适配器连接到一个.

• TP20/TP20 NI probe body

• TP20 stylus module – seven module

TP20测体

The TP20 probe body houses one half of the highly repeatable magnetic kinematic coupling that attaches the stylus module and body. The body also contains a magnetic proximity switch to inhibit triggering of the probe during automatic module changing with MCR20. Note: If the probe is operated close to magnetised parts/ clamping etc., the probe trigger may become inhibited. Countermeasures include the use of long styli, stylus extensions or body orientation to increase the distance to the magnetic source. Alternatively, use the TP20 NI probe body.

该探针主体房屋TP20一半的高度可重复的磁运动耦合连接测量模块和身体。体内还含有磁性接近开关抑制触发的探针与mcr20自动换模块时。注意：如果操作探测器接近磁化的零件/卡等，探头触发可能成为抑制。对策包括：使用长针，针体方向扩展或增加距离的磁源。另外，利用TP20镍探针体。

TP20 NI probe body

TP20吸盘传感器

The TP20 NI probe differs from the TP20 body in that it is not affected by magnetic fi elds. However, the probe trigger must be inhibited through software during change cycles using the MCR20.

TP20 的探针与TP20体，它是由非磁性领域的影响。然而，通过软件中使用mcr20变化周期

variants allow for optimisation of

performance to suit the application

• MCR20 module changing rack

- automatic operation

• The TP20 probe system may be used

with Renishaw’s PI 4-2, PI 7-2 or

PI 200 probe interfaces

autojoint.