加气混凝土生产线制品在国外发展到现在已有近一百年的历史,已成为建筑行业支柱产业,我国引进该技术也近四十年的历史,其生产工艺和设备装备趋于成熟。
由于加气混凝土设备(加气砌块)具有容重轻、保温性能高、吸音效果好,有一定的强度和可加工等优点,且生产原料丰富,特别是使用粉煤灰为原料,即能综合利用工业废渣、治理环境污染、不破坏耕地,又能创造良好的社会效益和经济效益,是一种替代传统实心粘土砖理相的墙体材料,多年来受到国家墙改政策、税收政策和环保政策的大力支持,加气混凝土制品已成为新型建筑材料的一个重要组成部分,具有广阔的市场发展前景。中国郑州东方重型机械有限公司提供加气混凝土整厂设备。年产2万立方,5万立方,10万立方,15万立方,20万立方,30万立方加气混凝土整厂设备
The repair fee is low. This machine is welded by high-strength steel and adopts special welding technique. Then the machine is stable and guarantees a good quality of products. At the same time, the machine’s life span can be prolonged greatly. This machine adopts the material pision type and uses independent hopper to avoid the advanced liquefying of concrete and then ensure the finished products’ quality.
加气混凝土设备可以根据原材料类别、品质、主要设备的工艺特性等,采取不同的工艺进行生产。但一般情况下,将粉煤灰或硅砂加水磨成浆料,加入粉状石灰,适量水泥、石膏和发泡剂,经搅拌后注入模框内,静氧发泡固化后,切割成各种规格砌块或板材,由蒸养车送入蒸压釜中,在高温饱和蒸气养护下即形成多孔轻质的加气混凝土制品。
首先将贮存的原材料经计量配料(1)后进入浇注搅拌机内,经搅拌(2)均匀后浇注温度和时间的预养(4)坯体达到一定硬度后,由翻转吊具把模具和坯体吊至切割机上。翻转吊具完成下列功能:a把模具在空中作90度翻转(5)(模具的一侧板成为支承坯体的底板直至蒸养出成品),b吊运载小车或切割支撑架上完成开模、脱模(6),c脱下的模框和返回的蒸养侧板(16)再重新组合成模具(17)等待清理后喷油(18)重新浇注。坯体在切割机上分步作六面切割;a首先进行坯体两侧面垂直切割(7),b然后进行纵向水平式切割(8);c最后进行横向水平式切割(9)。切割好的坯体由半成品吊具连同底板吊至蒸养小车(10),然后编入蒸压釜(11)进行高温蒸养(12),蒸养好后出釜(13),由成品吊具将成品堆垛(14)或装车、打包(15),蒸养侧板则返回(16)。
QT6-15 is an advanced machine in China and it makes use of the technology of Germany, Italy, Japan and other countries as well as that in China. This machine has the features as following: adjustable frequency to ensure the stable forming effect with various shapes and specifications of cement and concrete. This machine can make 6 pieces bricks once( 390mm×190mm×190mm )and recycles in 15-18seconds. The output in one year is 80000cubic meter. Hydraulic pressure whirling material-distributing device can pide the material evenly and the material piding time can be shorted. The productivity can be improved greatly. This machine is controlled by PLC and it can talk with human beings. It is easy to repair and maintenance. Hydraulic pressure and electronic machineries adopt imported components and operate reliably.
加气混凝土设备生产线的选型和数量根据工艺设计方案而确定,根据工艺设计,浇注分为固定式和移动式两种浇注,切割方式目前国内以翻转切割为主,其它配料系统、蒸压养护等设备都大同小异。
年产10万m3/年加气混凝土设备主要工艺设备配套一览表
设备名称 | 规格及型号 | 数量 |
搅拌机 | 4.2m 3 | 1台 |
搅拌浇注车 | 4.2m 3 | 1台 |
模框 | 3.95m×1.25m | 30个 |
模底 | 4.10m×1.44m | 100个 |
蒸养车 | 3.00m×1.20m | 50台 |
单梁双勾双速行车 | Q=5T | 1台 |
单梁单勾行车 | Q=5T | 1台 |
吊具 | 专用 | 2架 |
立柱支杆 | 专用 | 200根 |
蒸压釜 | φ2×21m | 6条 |
斗式提升机 | D250型 | 1台 |
球磨机 | φ1200×4500mm | 1台 |
蒸气锅炉 | 8t/h 1.6mpa | 1台 |
移动式卷扬机 | 3T | 6台 |
切割机 | XJQ-A-4.2×1.2×0.6m | 1台 |
铝粉搅拌机 | 0.04m 3 | 1台 |
斗式上料车 | 专用 | 1台 |
料浆贮罐 | 20m 3 | 2个 |
制浆罐 | 6m 3 | 1个 |
料仓 | 60m 3 | 2个 |
破碎机 | 250×400 | 1台 |
计量罐 | 2m 3 | 2个 |
加气混凝土设备(生产线)还可以根据客户要求随即组合!