'
供应FDA胶水，FDA胶粘剂、FDA硅胶、玻璃胶
TYPICAL PHYSICAL PROPERTIES
典型物理参数
特性 | 测试方法 | 结果 |
Shore A Hardness硬度，肖氏A | ASTM D2240 | 30+/-2 |
Tensile @ Break拉伸断裂 | ASTM D412 | 250+/-25 psi |
Elongation @ Break断裂延伸率 | ASTM D412 | 400+/-25 % |
Modulus 100% Elongation模数100%延伸 | ASTM D412 | 90+/-10 psi |
Tear Strength撕裂强度 | ASTM 624 (Die B) | 30 +/-10 psi |
Adhesion Strength (Peel)粘附强度（剥落） | TT-S-001 543, 3.5.9. | |
Glass玻璃 | | 10+/-2ppi |
Aluminum Primed铝（有底漆） | | 8+/-2 ppi |
Mortar (Primed)砂浆（有底漆） | | 12+/-2 ppi |
Sag or Slump垂流或下陷 | TT-S-001 543, 3.5.2 | 无 |
Shrinkage (Weight Loss)缩水（质量损失） | TT-S-001 543, 3.5.5 | <5% |
Extrusion Rate Service挤出率 | 3.2mm孔径50 psi | 130+5 gm/mm |
Temperature Range温度范围 | - - - | -18oC to +50oC |
Tack Free Time指干时间 | TT-S-001 543, 3.5.6 | 10-20分钟 |
Cure Time (1/8”珠状) | | 24小时 |
Cure Time –Ultimate Strength极限固化时间 | - - - | 7天 |
Joint Movement接缝移动率 | 4:1安全 | +25% |
Chemical Resistance抗化学品 | 提供清单 | 优 |
Resistance Color Retention抗染色性能 | - - - | 优 |
Weatherability抗风化性能 | - - - | 优 |
Reactivity of Byproducts腐蚀性 | | 对大多数物质无腐蚀性 |
Electrical Properties (22oC)电特性 |
Dissipation Factor损耗因子 | ASTM D150 | 50 Hz – 0.0009 1kHz-0.0004 1 MHz – 0.0002 |
Dielectric Constant介电常数 | ASTM D150 | 50 Hz – 2.7 1 kHz-2.7 1 MHz – 2.7 |
Volume Resistivity, .cm体积电阻率厘米 | ASTM D257 | 2 x 1014 |
Surface Resistivity表面电阻系数 | ASTM D257 | 3 X 1016 |
Dielectric Strength, KV/mm介电强度kv/mm | ASTM D149 | 18 |
储藏
Since ASI 335, when stored in original unopened container at or below 32°C (90°F), has a shelf life of 12 months from date of shipment.
ASI 335产品在32°C (90°F)或更低温度下保存于未开封的原装容器中可保存12个月。
WARRANTY AND LIMITATIONS有限保证信息
ASI warrants that its products will meet its specifications. ASI shall in no event be liable for incidental or consequential damages. Except as expressly stipulated, ASI’s liability, expressed or implied, is limited to the stated selling price of any defective goods.
ASI保证产品达到其技术特性。ASI不承担事故或偶然事件所造成的任何间接损害。除非另有明文规定,您所能获得的补偿，仅限于规定的任何次品销售价格。
'
