关键词：纸箱成型机,开箱机,自动开箱机,开箱成
型机
纸箱成型机、开箱机是指自动完成开箱、成形、下底折叶折曲。并现时完成下部分胶带粘贴，将叠成纸板的箱板打开，箱子底部按一定程序折合，并用胶带密封后输送给装箱机的专用设备。自动纸箱成型机、自动开箱机是大批量纸箱自动开箱、自动折合下盖、自动密封下底胶带的流水线设备，机器全部采用PLC+显示屏控制,大大方便操作，是自动化规模生产必不可少的设备。
纸箱成型机、开箱机、自动开箱机、开箱成型机 总数：6个产品
Key: Case Erectors
Case equipment is used to erect, pack, seal, or unpack cases of products. In most instances, case equipment is used to form cardboard boxes; however, corrugated materials and plastics formers are also available. Types of case equipment include case erectors, case cartoners, carton packers, carton sealers, and unpackers.
Case erectors and case cartoners are case equipment which automatically forms corrugated cases. A stack of corrugated blanks are knocked down and placed into the machine. The blanks are pulled out of the machine one-by-one and formed into cases. The newly formed cases are sealed at the bottom with tape or glue.
Case Erectors Total：6products
Click
| CF-10T Case Erectors | |
| Model | CF-10T |
| Air Pressure | 4kg/cm2 |
| Case Size | L200-600mm,W185-480mm,H120-480mm(The height is the standard sealing height of carton sealer machine) |
| Erecting type | Fold bottom covers of carton and can be used as the platform for packing products |
| Electric adoptions | AIRTAC cylinder,"AIRTAC" Regulator valve,"AIRTAC" Pneumatic control valve,"Festo" Air time-delay commutator |
| Worktable height | Stand: 600~780mm(adjustable) Castor wheel:700~880mm(adjustable) |
| Outside dimension | L1500 X W900 X H780mm(Stand)/880mm(Castor wheel) |
| Machine weight | 80kg |
Click
| CF-20T Case Erectors | ||
| Alarm when lack tape or case | ||
| Model | CF-20T | |
| Power supply | 220V 50Hz,500W(optional) | |
| Air Pressure | 6kg/cm2 | |
| Tape Width | 4.8-6.0cm | |
| Working Speed | 0-10cases/min | |
| Case Size | L290-530mm, W180-285mm(base carton size must be suitable as below:630>W/2+H>280 L change scope 150mm) | |
| Machine appearance | L2050mm x W2200mm x H1350mm | |
| Machine weight | 400kg | |
| Environment conditions | Humidity≤98% Temperature 0-40℃ | |
点击放大
- CF-10T 纸箱成型机
- 气 压： 4公斤/平方厘米
- 纸箱尺寸： L 200-600 x W 150-480 x H 120-480mm(高度为封箱机封箱的标准高度)
- 成型类型： 底部折盖，可以作为装箱平台
- 电气配置： 亚德克汽缸，亚德克调节阀，亚德克气动控制阀，费斯托空气延时继电器
- 工作台高度： 脚杯：600–780mm(可调节) 脚轮：700 - 880mm(可调节)
- 外型尺寸： L 1500 x W 900 x H 780mm (脚杯)/880mm (脚轮)
- 机器重量： 80kg
点击放大
- CF-20T 纸箱成型机
缺胶带和纸箱时自动报警
功 率： 单相 220V、50Hz/60Hz、600w
- 气 压： 6公斤/平方厘米
- 胶带宽度： 4.8-6.0cm
- 成型速度： 12箱/分钟
- 纸箱规格： 最大尺寸：L550mm,W400mm,H400mm
- 最小尺寸： L200mm,W150mm,H100mm
- 机器重量： 约400kg
- 有无胶带及无纸板箱报警功能
点击放大
- CF-30T 纸箱成型机
缺胶带和纸箱时自动报警
功 率： 380V、50Hz、2.5KW
- 气 压： 4-8公斤/平方厘米
- 胶带宽度： 4.8-7.2cm
- 成型速度： 20～60箱/分钟（根据规格）
- 胶带长度： <＝2000m
- 配热熔胶机： 任何品牌的机器都能相配
- 纸箱规格： 最大尺寸：L 150mm～506mm
W 150mm～405mm
H 102mm～405mm - 外形尺寸： 长 3000mm，幅 2000mm，高 1700mm
- 机器重量： 850kg
