相关配置：
配备：铝合金浆1付。打气筒1个。专用修理盒1个。椅子板1块。包装箱一个。说明书一本。
注：1本产品不含船外机
2本产品适用于短轴船外机
3本产品有红、橙、黄、蓝、黑、军绿、深灰、浅灰等颜色
设计和建造 DESIGN AND CONSTRUCTION
开发完美的设计是制造游艇的重要前期阶段。游艇的设计具有良好的安全性、持久性、高效性的表现。
The beginning stage in boat construction is the most impotant for Shinkwang in developing a faultless design and the design of Aquaquick’s boats are based on safety and high performance.
Our modem plant was established solely fou the protection of inflatable boats and our factory’s design and quality control systems insure sppeed,efficiency and most importantly quality
P.V.C材料 P.V.C FABRIC
游艇采用双面P.V.C,涂层1000丹尼尔的聚酯纤维织物具有气密，抗磨损，耐油和抗日光照射性能，我们对材料提供三年的保修期。
P.V.C inflatable boats use 1000 denierpolyester fabric,which has been specially coated on both sides with P.V.C.
The fabric is completely airtight in water and highly resistant to abrasions,feul and huarmful sunlight.Our confidence in our fabric is reflected in our fabric is refected in our favric is reflected in our 3 year fa-bric warranty.
Hypalon材料 HYPALON FABRIC
游艇不仅采用P.V.C材料而且也采用Hypalon材料，这种由四层压在一起的表层材料能够确保优良的耐用性。
inflatable boats use not only P.V.C but also Hypalon coated fabric made from four calendered sheets ensuring perfect watertightness and rubber of the highest xohesive ability.
粘合方法ADHESIVE STRUCTURE&GLUE
游艇接缝采用重叠方法，内外封胶带做加强保护，我们采用和P.V.C材料相匹配的聚亚安脂胶，力求获得最好的粘合效果。
seams are overlapped a full inch and reinforoed with seam tape both outside and inside or extra added protecion.
The inner tubes stay airtight while protecting the tubefrom sudden impacts.
Tomaximize our bonding and adhesiveness weues apo;yurethane based glue.
Poluurehtane hlres offer high durability and protection to heat and salt water.
By incorporating a polyurethane base glue. Our customers can rely on our boats durability.
间隔膜 BAFFLES
艇身内部的间隔膜不仅能保护各个气室的安全密封，而且能平衡艇身各部分的压力。
The inter baffles on our boats not only keep inpedual air chanmberscompletely sealde for safety but they also have a flexible design which works to equalize air pressure between xone parts.
胶合板材 PLYWOOD
游艇的设计是专为航海使用的，这种设计赋予游艇尾板和底板部分极高的耐用性。
inflatable boats use marine plywood whhich is specially designed for marine applications.
Marine plywood offers strong seals between plywood board sections and also offers high durability against sea water.
In addition manrine plywood is coated with P.U.painting which delicers additional protechion against sunlight,salt water,fuel and oil.
产品特点：
充气产品的性能及优点：
1、全部采用进口专用气艇布料 0.9T1000D/PVC ，气密性、耐磨性极好、使用寿命长。
2、采用进口气阀，方便、安全、可靠。
3、所有粘接部位全部采用进口胶水粘接，剥离强度以及耐高温、耐水解、抗紫外线等性能均大大优于国产胶水，即使在阳光暴晒下，气艇连接部位牢固性能得到充分保证。
4、进口材料色牢度高、布面颜色历久如新，进口专用耐磨双色护舷，使船体经久耐用。
挂机艇艇壳气囊采用胶粘与高周波热合工艺加工制作，气密好、强度高、经久耐用、质量一流，航速 40 — 60 公里 / 小时。
适用范围：海面冲浪，救生，通讯抢修，水库巡逻及钓鱼等。
拆卸
注意:船身要清洁和干爽
1.打开全部气阀和压下气阀芯并顺时针方向轻微旋转，锁住气芯。
2.拆卸座位
3.先拆除U型管再拆除中间踏板后才拆船头板和船尾板
4.用脚泵把船各条储气管内的气全部抽出
5.将般底向下,先把船舷两边折叠向船身,再由船头摺向船尾
6.储存船在清洁干爽的地方,小心小动物破坏船身
清洗手续
所有船布都可用肥皂和清水清洗，PVC布出厂前已加有防紫外光涂层。
注意:不可用含乙烯基溶剂、化学品、含氯的清洁剂和汽油清洗船身
如每半年全船喷防紫外光剂一次(在船舶用品店有售)，可增长橡皮艇的使用年限
安全守则
所有橡皮艇使用者,在开始使用橡皮艇前应要深切了解所有有关驾驶和使用橡皮艇的国家法律和法例、海洋法规和安全守则。更要在使用前了解艇身、船桨和其他配件有否损坏和气压是否充足安全，并要了解天气和周围环境及带备适量救急药物
售后服务本产品在使用一年内非人为原因损坏保修。（被尖锐的东西划伤属人为原因）保修期运费各承担一半。过保修其后可终身帮助维修护理。但运费同买家自理。
