保利特 CTP系统(16张22张28张)租赁方案 一、预付押金,获得设备 设备租赁押金:¥150000元 租赁设备清单:Alpha-900热敏式计算机直接制版机(幅面1030*860毫米、2400dpi,16张/小时) 二、单张收费的租赁年限方案 三年租期方案(租赁期满,从押金中扣付¥10万元,可买断设备) 出版计费单价:对开¥6元/张(*使用超过9万张后,如继续租赁使用,按照¥2元/张收费) 租赁时间 | 第一年 | 第二年 | 第三年 | 年最低付费印数 | 25000 | 30000 | 35000 |
五年租期方案(租赁期满,从押金中扣付¥5万元,可买断设备) 出版计费单价:对开¥7元/张(*使用超过10万张后,继续租赁使用,按照¥2元/张收费) 租赁时间 | 第一年 | 第二年 | 第三年 | 第四年 | 第五年 | 年最低付费印数 | 12000 | 18000 | 22000 | 24000 | 24000 |
三、包月收费方案 36个月租期方案(租赁期满,从押金中扣付¥10万元,可买断设备) 收费方式:租期共36个月,收费¥1.5万元/月 55个月租期方案(租赁期满,从押金中扣付¥5万元,可买断设备。) 收费方式:租期共55个月,收费¥1.2万元/月 60个月租期方案(租赁期满,从押金中扣付¥5万元,可买断设备。此方案要求捆绑版材) 收费方式:租期共60个月,收费¥1万元/月 四、租赁使用的重要约定 1、充值张数 按计费单价,预购CTP出版使用张数,每次购买不低于2000张 (出版幅面超过745mm×605mm的为1张,不超过的按0.6张计) 2、设备保修 在租赁期内正常使用方式下,出租方对设备提供全保修服务(含零件、人工、差旅费) 五、租赁期满或达到租赁期要求的付费出版张数时的事项 1、期满终止 退还设备,返还押金 2、期满续租 按年延续租赁合约,计费单价调整为¥2元/张,用版量不低于上一年的最低要求数 3、买断设备 按照约定买断设备,返还剩余押金,设备全包保修年费:4万/年。 特别说明 1、配套设备 采购符合要求的CTP配套设备,如冲版机、服务器、其他配套软件、硬件等 2、使用、服务 遵守设备使用、保养规范和服务流程,配合服务人员的保养、维修工作 3、CTP版材 使用出租方认可的有品质保障的版材,同等价格优先采购、使用设备出租方提供的版材 4、核算租赁费 使用方充值费必须达到每月最低要求,这是维持双方正常租赁服务关系的基本保障 5、相关培训 在甲方指定地点提供优惠收费培训:流程培训,设备使用及维护保养培训。 Mature and reliable 32-64 channels; Discrete 830nm laser diode technology.Extremely clear and sharp screen dots can be exposed; Resistance rate is high and it’s operated in light room; Service life extends as long as tens of thousands of hours; Replacement is economic and convenient. Dynamic and Automatic Focusing Track in real time the variation of surface fluctuation and adjust the lens forwards or backwards to assure the distance between exposure dots and lens is unchangeable. Each laser spot is exposed at the best focal length to assure all the screen dots are accordant, clear and sharp. Special Screen Dots Control Technology Screen dots gain problems caused by size of laser spots are accurately compensated for so that 1%~ 99% grayscale gradients is perfectly presented. Exposure Design with External Drum Style The printing plates are clamped and bent in the style closest to the press, high-quality and exactly accordant dots are exposed and printing formes are output at high speed up to 29 pages of 1030x800mm per hour. Convenient Operation High-speed USB2.0 interface makes ALPHA CTP have Plug and Play function like a desktop printer. The aided output management software (Tiff download) can realize seamless link with any mature workflow. ALPHA CTP Specifications | Model | ALPHA 900Ⅱ F | ALPHA 900Ⅱ S | ALPHA 900Ⅱ E | Exposing Method | External Drum | Imaging System | 64-channel | 48-channel | 32-channel | Discrete 830nm laser diode | Throughput | 29 plates per hour | 22 plates per hour | 16 plates per hour | 1,030mm×800mm 2,400dpi | Plate Size | Max. 1,130mm×900mm, min.400×300mm | Exposing Size | Max.1,130mm×884mm, min. 400mm×284mm | Media Type | 830nm thermal plate | Plate Thickness | 0.15mm to 0.3mm | Resolutions | 2,400dpi | Repeatablity | continuous exposing for four times or above on the same plate with a temperature of 23℃ and humidity of 60%) | Interface | USB2.0 | Plate Loading | semi automatic | Weight | 900KG | Size (W×D×H) | 2,530mm×1,050mm×950mm ( W×D×H ) | Power Supply | single-phase:220AC, +6%, -10%, Power Consumption: 4KW | Environment | recommended:21-25℃,Max. 18-26℃,humidity:40-70% |
|