Eastman Tritan™ TX1001 is an amorphous copolyester with excellent appearance and clarity. EastmanTritan™ TX1001 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan™ copolyester\'s outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan™ TX1001 copolyester may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan™ TX1001 copolyester is certified to NSF/ANSI Standard 51 for Food Equipment Materials and is also certified to NSF/ANSI Standard 61 - Drinking Water System Components-Health Effects.

添加剂 

• 脱模

性能特点 

用途 

机构评级 

加工方法 

• 注射成型

比重

1.18

g/cm³

收缩率 - 流动

0.50 到 0.70

%

洛氏硬度 (R 计秤, 23°C)

112

拉伸模量 (23°C)

1550

MPa

抗张强度

伸长率

弯曲模量

弯曲强度

悬壁梁缺口冲击强度

无缺口悬臂梁冲击 (23°C)

无断裂

热变形温度

透射率 (总计)

90.0

%

雾度

< 1.0

%

干燥温度

88.0

°C

干燥时间

4.0 到 6.0

hr

加工（熔体）温度

260 到 282

°C

模具温度

38.0 到 66.0

°C