金路电焊网机（自动网片焊机），是机械电子电脑一体化最先进的焊网设备，本机最大的优点是径丝可调，纬丝的孔距输入电脑就能达到您所得到的孔距，网孔随意可变。 本机所焊的网片平整，对角线误差很小，经焊网专家评定是最先进的焊网设备。如您所需要超过2.5米的设备和大于直径6MM的设备可预先订货。
基本技术参数：
1、本机网片的最大宽度为2.5米.
2、焊接直径为2.5MM--6MM
3、本机网片的最大长度：6米
4、最大焊接次数：35次/分
5、焊接纵筋间距：50 -100-150 mm
6、焊接横筋间距：50 -75-100-150-200 mm
7：焊接材料要求：Q195F等含碳量低于相就标准的退火线材
8、焊点数量：50（可根据需要自主先择）
9、额定功率：200kva×6
10、本机广泛用于铁路护栏网、高速公路护栏网、桥梁高层建筑等等网片的焊接。
机器组成部分：
1.主机：包括焊网机构，纬丝落料部分
2.附机：拉网机构
3.辅助设备：调直机
Jin Lu welded mesh panel machine (Automatic Welding Panel Machine), is the mechanical integration of the most advanced electronic and computer network welding equipment, the machine of the biggest advantages is the wire diameter adjustable weft pitch into the computer will be able to achieve what you get the pitch, mesh random variable. The mesh welding machine flat, diagonal error is very small, the welding network expert assessment is the most advanced welding equipment. If you need more than 2.5 m greater than the diameter 6MM devices and equipment can be pre-orders.
Basic technical parameters:
1, the machine mesh a maximum width of 2.5 meters.
2, welding diameter 2.5MM--6MM
3, the machine mesh Maximum length: 6m
4, the maximum number of welds: 35 beats / min
5, welded longitudinal reinforcement spacing: 50 -100-150 mm
6, welding transverse reinforcement spacing: 50 -75-100-150-200 mm
7, Welding Material requirements: Q195F such as carbon content lower than the phase wires on the standard annealing
8, the number of solder joints: 50 (first choice according to need autonomy)
9 Rated Power: 200kva × 6
10, This machine is widely used in railway fence, highway fence, bridge high-rise buildings, etc. mesh welding.
Machine components:
1 host: including welded mesh body weft blanking parts
2 attached to machines: dragnet institutions
3 Auxiliary equipment: Straightening Machine
