德尔福HKP/HKT直立式耐酸碱泵 产品特点 ·可空转使用,绝不因空运转而损坏 ·泵浦所有接液部分,均采用耐腐蚀之FRPP、CPVC、 PVDF材质,视输送的化学药液而定 ·HKP/HKT系列采用C型卡簧和入口滤纲装置,入口主体 体积较小,更适合槽内设计使用。 ·在马达输出轴处及泵浦底部分别装置耐酸碱之密封件, 双层保护可防止化学气体损坏马达轴承,而游离之化 学气体将经由支撑板上的气孔顺利排出。 ·特殊设计之叶轮,即使叶轮偶尔逆转也不会损坏泵浦 ·泵浦出口有PP和PVC两种接头,供客户方便使用。 Features ·Can be used idling not damaged due to idling. ·Then fluid pumped all part of using corrosion-resistant FRPP, CPVC, PVDF material, depending on the chemical transmission of the liquid. ·HKP/HKT serise using C-mount and the entrance of filter devices, the main entrance of smaller, more suitable for the use bed desing. ·At motor output shaft and pumped separately at the bottom of the device seals acid, double-layer protection to prevent damage to motor bearings chemical gasses, and off-axis of the chemical gas will be distributed through on-board support from the stomatal smoothly. ·Special design of the impeller, even the occasional reversal of the impeller will not damage the pump. ·Outlet has two types of PP and PVC joints for ease of use customers. 技术参数 型号 | 比重 | 进出口径 mm | 马力 | 50Hz/60Hz | 重量 KG | 相数 | HP | 极数 | 曲线 | 扬程 M | 流量 L/min | HKP-25VK-1/2 | 1.1 | 40x25 | 1/3 | 1/2 | 2 | e/E | 13/13 | 160/165 | 18 | HKP-40VK-1 | 1.1 | 50x40 | 1/3 | 1 | 2 | f/R | 12/15 | 280/350 | 19 | HKP-40VK-2 | 1.1 | 50x40 | 3 | 2 | 2 | g/G | 14/19 | 320/400 | 24 | HKP-25VP-1 | 1.4 | 40x25 | 1/3 | 1 | 2 | i/I | 11/12 | 200/185 | 18 | HKP-40VP-1 | 1.4 | 50x40 | 1/3 | 1 | 2 | j/J | 10/11 | 230/230 | 18 | HKP-40VP-2 | 1.4 | 50x40 | 3 | 2 | 2 | k/K | 11/15 | 250/280 | 24 |
声明:本文中所有文字、数据、图片均只适用于参考,ISG系列性能参数表性能参数、ISG系列性能参数表结构尺寸参数等详情,请联系我们的在线客服或技术工程师QQ411071791 请记住我们, HKP/HKT直立式耐酸碱泵由深圳德尔福精密机械设备有限公司提供:http://www.defjx.com/ http://www.szdef.com/ |