| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
前沿（美迪克LMDK-SC24G系统说明）：
该太阳能热水系统主要由太阳能集热器，储热承压水箱，太阳能工作站，支架四部分组成。太阳能集热器选用本公司专利超导集热器，当太阳辐射照度为800瓦/平方米时，单支集热管可在2.5小时内即把管里的常温水加热到90℃。储热水箱采用搪瓷内胆，结合高效保温材料聚氨脂整体发泡制作而成，从而保证了太阳热水系统在零下50℃仍可照常使用。标配支架，保证使用寿命。系统可以安装在朝南屋面上，也可以安装在庭院草坪上，及各种建筑物朝南的坡面上，热水可以多龙头使用，适用范围广，投资少，效果好，操作简单，更为重要的是安全，方便，节能，所以被专家们赞誉为“绿色产品”。
系统配置：
1、TAC超导管：以蓝钛科技为基础的新工艺高科技产品，采用紫铜管及高纯度铝片无缝隙结合，利用紫铜管迅速导热，加热水箱中的水，水温上升速度提升30%以上。管内不走水设计，杜绝冻管、炸管现象，为家人带来流畅热水。
2、全电脑控制：全自动电脑控制，也可设置手动模式。全天候监测水压、水位、水温。实现自动补水、防干烧、防冻裂、故障自动报警等功能，带来智能科技全方位省心享受。
3、选配支架：使用高品质加厚铝合金铝型材，轻便耐用，重量轻，坚固耐用，抗腐蚀性强。能适应北方巨大昼夜温差变化，使用安全放心。
4、省心配置：采用原装英格莱800超长电加热棒，快速加热，满足临时热水需求。 特有防干烧设计，即使断水也不会烧坏，使用寿命是普通电加热棒的3～4倍。配合独有“防电墙”装置，有效防止漏电、触电，如坚固的盾牌，保护家人洗浴安全。
5、承压水箱：采用“二次换热”技术，洗浴用水与循环加热介质分离，高效换热，快速循环，实现热利用的新高度。出热水安全承压。塘瓷内胆疲劳试验达到16万次的国标一级和25万次的澳洲标准。
6、规格选配：可选双盘、单盘、无盘水箱，容积可选80－500L
性能特点
1．集热器与储水箱分离，全承压运行。
2．采用特别设计太阳能控制仪，全自动可靠运行。
3．保温水箱可以放置在室内任何地方。
4．采用高效集热器，适用任何地理位置，不怕冻，四季使用。
5．金属超导热管集热器，真空管内不走水，在北方零下50度照常供热，永不炸管。
6．采用塘瓷内胆电热水箱，承压运行，使用方便。
7．恒温定时电加热，设置数据断电记忆保护，24小时供热水。
8．集热器可以安装在阳台，南墙，坡屋面，雨棚等。
9．模块化设计，积木式组装，运输安装方便，真正实现与建筑一体化。
Key Specification:
Patented product
Size of tube: Ф70x1700 or Ф70x1900 mm
Freezing resistance: -35℃, it can be used in special cold area.
Highest stagnation temperature can reach 250℃
With small thermal capacity, it can output power in 5 seconds when temperature up to 25℃
High efficiency, at least 10% higher than normal tubes
It is widely used in large-sized hot water project/sea water desalination/Industrial heating/heating system and other fields
Model |
LMDK70/1700 LMDK70/1900
| ||
Length | 1700mm1900mm | Absorption coefficient | >92% |
Glass tube diameter | 70mm | Emission coefficient | <10% |
Glass thickness | 2.0mm | Vacuum | <5x10-3 Pa |
Glass Material | Borosilicate Glass 3.3 | Wind resistance | 30m/s |
Absorptive Coating | AL/N/AL | Freezing resistance | -35℃ |
Absorber material | Aluminum | Stagnation Temperature | >250oC |
Condenser size | 14x75mm | Net weight | 2.21kg |
分体式系统相关区介绍：
Product information :
1)The pipeline is made of all the red copper and conducted by heat transfer medium liquid. and operated when confined.
2) Easy to use, also convenient to install; Can be put in the courtyard, on the roof or balcony,can be connected more collectors ,arbitrary assembly which meet the large water consumption.
3) Inlet water hole connects to the tap water, and the outlet hole connects to the tap water, and the outlet hole produces pressure hot water directly
4) Heat transferring efficiency :use phase change theory and capillarity action.making its own heat transfer efficiency is several thousands of times higher than the same materia
5)Assembly angle : 20o-70oVertical, -5oto +5oHorizontal
6) Heat pipe has its special design principle; and no water in the pipe. Run all the same when incident breakage of vacuum tubes.
Specification :
Header
TU1 copper is used for flow channel, ø35 cooper pipe automatically shrieked to ø14 by the necking machine, without welding works thus to gain higher strength.
Outer manifold l: SUS304-2B food class stainless steel
Aluminum alloy by electrophoresis process
Bracket:SUS201stainless steel ,SUS 304-2B ,Aluminum alloy electrophoresis
Insulation：Rock wool or polyurethane foaming
Aluminum fin:the aluminum fin tightly touches the vacuum tubes, so as to faster heat transfer and low
heat loss.
Heat pipe dimension:58mmx1.8m /47mm x 1.5 m
Conversion Factor: ho = 0.647
Heat transfer coefficient: a1 = 2.093W/㎡k
Temperature dependent heat transfer coefficient: a2 = 0.0085 W/㎡k2
90Optimal flow rate: 0.1L/min/tube - 0.026G/min/tube
Inlet & Outlet: Ø22 or 3/4 inch
Hail resistance :25mm
Max pressure:12bar (1.2 Mpa)
Coating of vacuum tube : AlN-AlN-SS/Cu
Stagnation :280℃
Heat pipe :anti-freezing＞ – 35 ℃
