适用车型：宝马MINI Cooper S 11-13 L4-1.6L (Turbo)
重量:3.2kg
零件号：54-12452(干式)/51-12452(湿式)

英文网址：/details_new.php?partno=54-12452&filter&menu=gas&searchtype=word&keyword=54-12452&brandID=53

54-12452安装示意图 54-12452产品与原厂性能曲线对比

汽车的进排气系统好比人的呼吸系统，无论自然吸气还是增压，顺畅的进排气对引擎的发挥都至关重要。在美国被誉为进气专家的Advanced FLOW engineering (aFe Power)一直专注于进排气系统的开发，目前aFe Power设在加州的总部占地近1万5千平方米，当中包含研发基地、生产基地和仓库，其产品包括高流量风隔、机油隔、进气歧管、涡轮增压器、中冷器、ECU、节气门及排气系统等。目前aFe Power主打BMW车型，基本在售的BMW车型都有相对应的进排气套件。

aFe Power高端品质高流速进气系统
优质高效的进气系统是您为提升马力而投资的最佳花费之一，不必怀疑,aFe Power再次成为当之无愧的领导者。空滤冬菇与AEM同平台设计开发我们的工程师团队也正不断设计、建造和测试新的系统。
aFe Power 进气系统是为提升马力设计
aFe Power进气系统可以完全取代包括过滤器、风箱和风管在内的原厂气流组装件。aFe Power 进气系统由于在设计上让气流变得平稳流畅，因此可以显著降低进气限制。这让您的车辆引擎能够吸入的气量超过原厂空气滤清组装件。更多的进气表示在引擎的整个RPM范围内都能提供更大的可用功率和加速。配合这些套件使用的高流速过滤器可以清洗和重复使用。
更易于安装
我们对aFe Power的进气套件进行了特别设计，可以使用现成的原厂钻孔和安装点，让安装更简单方便，aFe Power的进气系统都不需要任何切割和钻孔，做到真正是专车专用.

aFe Power的独特优点

*增加马力和加速度
*使用期限>100万公里
*专车专用设计,代替原车滤清器和空气箱
*可替换原厂的过滤器和集气箱
*安装简单通常要30分钟左右即可完成安装
*过滤器可以重复清洗使用
*行驶5000公里才需清理
*可继续使用原厂行车电脑程序

英文说明:
aFe is proud to introduce the Stage-2 air intake system for the 2011-2013 MINI Cooper S with the L4-1.6L turbo engine. This Stage-2 intake system produces up to 18HP and 20lbs. x ft. of torque over stock, while outflowing the factory intake by 49%. Included in this system is a washable/reusable "oiled" conical air filter that uses five layers of progressive weave media for maximum air flow. This intake system uses a 16 gauge steel heat shield that is positioned under the factory hood scoop to supply the air filter with cool, dense air for maximum performance.

360 Degree Air Filter:
A huge inverted cone 360 degree round air filter is used for maximum air flow and filtration (98.6% efficient). The Pro 5R performance air filter features 5-layers of

progressively finer mesh cotton gauze media and is constructed with 100% polyurethane for long life and multiple cleaning cycles.

Top Mounted Heat Shield Design:
aFe developed this heat shield to attach onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations.

Bump Lock Filter Mounting Design:
The air filter uses a unique bump lock flange design that allows the air filter to securely mount to the heat shield with no hardware.

Simple Installation:
The intake tube was engineered to fit the MAF sensor perfectly, without the use of a coupler. This eliminates hardware which allows for a simple, quick installation.

Note: Does Not Fit Clubman Models

零件号：54-12452(干式)

零件号：51-12452(湿式)