适用车型：宝马328i (F30) 12-14 L4-2.0L (t) N20
同时适用于：
13-14宝马320i (F30) L4-2.0L (t) N20
13-14宝马428i (F32) L4-2.0L (t) N20
13-14宝马228i (F22) L4-2.0L (t) N20
重量:2.7kg
零件号：54-12212(干式)/51-12219(湿式)

英文网址：/details_new.php?partno=54-12212&filter&menu=gas&searchtype=word&keyword=54-12212&brandID=53

54-12212安装示意图 54-12212产品性能参数 54-12212产品与原厂曲线参数对比

汽车的进排气系统好比人的呼吸系统，无论自然吸气还是增压，顺畅的进排气对引擎的发挥都至关重要。在美国被誉为进气专家的Advanced FLOW engineering (aFe Power)一直专注于进排气系统的开发，目前aFe Power设在加州的总部占地近1万5千平方米，当中包含研发基地、生产基地和仓库，其产品包括高流量风隔、机油隔、进气歧管、涡轮增压器、中冷器、ECU、节气门及排气系统等。目前aFe Power主打BMW车型，基本在售的BMW车型都有相对应的进排气套件。

aFe Power高端品质高流速进气系统
优质高效的进气系统是您为提升马力而投资的最佳花费之一，不必怀疑,aFe Power再次成为当之无愧的领导者。空滤冬菇与AEM同平台设计开发我们的工程师团队也正不断设计、建造和测试新的系统。
aFe Power 进气系统是为提升马力设计
aFe Power进气系统可以完全取代包括过滤器、风箱和风管在内的原厂气流组装件。aFe Power 进气系统由于在设计上让气流变得平稳流畅，因此可以显著降低进气限制。这让您的车辆引擎能够吸入的气量超过原厂空气滤清组装件。更多的进气表示在引擎的整个RPM范围内都能提供更大的可用功率和加速。配合这些套件使用的高流速过滤器可以清洗和重复使用。
更易于安装
我们对aFe Power的进气套件进行了特别设计，可以使用现成的原厂钻孔和安装点，让安装更简单方便，aFe Power的进气系统都不需要任何切割和钻孔，做到真正是专车专用.

aFe Power的独特优点

*增加马力和加速度
*使用期限>100万公里
*专车专用设计,代替原车滤清器和空气箱
*可替换原厂的过滤器和集气箱
*安装简单通常要30分钟左右即可完成安装
*过滤器可以重复清洗使用
*行驶5000公里才需清理
*可继续使用原厂行车电脑程序

英文说明:
This Stage-2 cold air intake system resulted in 11 max horsepower, 15 lbs. x ft. torque and out-flowed the factory intake by 38% on the 2012-2014 BMW 328i (F30) N20 Turbo. This system includes a durable 18-gauge, powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. The Pro 5R air filter uses five layers of progressively finer mesh cotton gauze oiled media to provide maximum airflow for best performance results. A 3 inch one-piece mandrel bent wrinkle-black powder-coated intake tube and bracket, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

Filter Flange Retention Design:
The air filter uses a unique (patent pending) flange retention design that requires no hardware to mount the filter to the heat shield to provide a quick hassle-free installation with minimal hardware.

Dyno Tested Intake Tube:
This dyno tested intake tube is designed to maximize air velocity and uses the latest engineering tools for maximum performance. This large intake tube is mandrel-bent to smoothly direct the increased airflow into the engine.

7" Tall Conical Filter:
This intake utilizes a huge, 7" conical Pro 5R Filter. This filter features 5-layers of progressively finer mesh cotton gauze oiled media to provide maximum flow with excellent filtration. The progressive layering of media allows the filter to flow at high levels, even when dirty. The Pro 5R filter media has been tested at 98.6% efficient.

One-Piece Heat-Shield:
The air filter is housed in a one-piece, black powder-coated 18-gauge heat shield that keeps warm engine air out for maximum performance. This one-piece heat shield snaps onto the lower half of the factory air box to provide a quick and easy installation utilizing factory mounting locations.

Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

零件号：54-12212(干式)

零件号：51-12219(湿式)