国内顶级☆超长寿命☆价格优惠☆ 【NKP-1型管道内壁喷涂器】

NKP-1 type pipe inner wall spray device

NKP-1型管道内壁喷涂器适用于小孔及中型管道的内壁涂装，它是利用无气喷涂机输送来的高压涂料，通过特制的喷嘴，使涂料雾化后直接形成喇叭形（园锥形、空心），均匀地喷在管道内表面，从而实现管道的涂装。 

NKP-1型管道内壁喷涂器主要适用于Ф50-Ф300mm的管道，涂料粘度不得高于80秒（4号福特杯）。如果涂料粘度高于80秒，需加溶剂稀释。

NKP-1型管道内壁喷涂器基本上不受管道长度限制，但最好不长于15米。

NKP-1-type pipe inner wall spray device is for bore and medium-sized pipe inner wall coating, high-pressure paints which transfers from the airless spray coating machine and goes through a special nozzle is formed a trumpet (Cone -shaped, hollow), evenly spray the inner surface of the pipe which lead to successful pipe coating.

NKP-1 type is mainly applied in Ф50 - Ф300mm pipes, paint viscosity shall not exceed 80 seconds (No. 4 Ford cup). If the pait viscosity is higher than 80 seconds, solvent should be added for dilution.

NKP-1 type basically is unaffected by pipe length, but preferably pipe length is not longer than 15 meters.

主要技术参数Technical parameters 

 外形结构:

1.喷嘴 2.滚轮 3.支架 4.导流管5.调节手轮 6.高压软管 7.SPQ2手喷枪

安装方框图

安装示意图