'
诸城市博创机械有限公司是国内制浆造纸及污水处理设备的专业制造企业。公司地处山东半岛东南部,东临海滨名城青岛市,南靠新兴港口日照,区位优越,交通便捷,基础设备齐全。
公司拥有完善的质保体系,并常年与国内著名的专业院所紧密合作,拥有较强的非标设计、制造和服务能力,生产检测设备完善、品种规格齐全、产品质量可靠稳定,主要产品有造纸制浆机械、环保机械两大类,制浆设备有:双螺杆分丝机、高浓磨、中浓磨、水力碎浆机、压榨脱水机等;环保设备有微滤机、污泥压滤机、溶气气浮机、涡凹气浮机、各种旋转格栅、刮吸泥机等。
BCTM系列除铁除锰过滤器
BCTM SERIES OF FILTRATION EQUIPMENT
FOR IRON AND MANGANESE
BCTM系列除铁除锰装置适用于含铁量在10mg/l以下,最高不超过15mg/L,PH值不低于5.5的地下水除铁除锰处理。经处理后水中含铁量小于0.3mg/l,符合国家GB5749-85“生活饮用水水质标准”。特别适合中小城镇、农村供水、工矿企业自来水源的地下水除铁及工业用水软化,除盐工艺的预处理。采用高效吸气装置,完成气水混合,代替空压机达到低成本、无噪音。无须投加化学药剂,降低运行费用,减轻管道及设备腐蚀性。
BCTM series of filtration machines are suitable for processing the water contained less10mg/l not over 15mg/L iron and the PH value not less 5.5. After processing ,the rate of iron in the water is not over 0.3mg/l and meet the standard of GB5749-85 “drinking water standard”. Especially for softing water and salt removal for the small town and rural water supplying. And industry. Adopts high effictive absoring device to complete gas water combination to substitue the compressor to low the cost and noise. No need chemical medicine to low the operating cost and lesson the corrosion on the pipe and the machines.
BCTM系列除铁除锰过滤器技术参数
| 型号 | BXTM-3 | BCTM-5 | BCTM-10 | BCTM-15 | BCTM-25 | BCTM-35 | BCTM-50 | BCTM-60 |
| 额定处理水量(m³/h) | 3 | 5 | 10 | 15 | 25 | 35 | 50 | 60 |
| 常规工作压力(MPa) | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 |
| 设备运行重量(kg) | 3400 | 5000 | 6500 | 13600 | 21900 | 33300 | 47000 | 51000 |
| 进水阀门 | DN32 | DN50 | DN50 | DN80 | DN100 | DN100 | DN125 | DN125 |
| 出水阀门 | DN100 | DN100 | DN125 | DN150 | DN250 | DN300 | DN350 | DN350 |
| 反冲排水阀门 | DN100 | DN125 | DN125 | DN150 | DN250 | DN300 | DN350 | DN350 |
| 筒体直径(mm) | 800 | 1000 | 1200 | 1600 | 2000 | 2400 | 3000 | 3200 |
| 设备高度(mm) | 3260 | 3300 | 3510 | 3780 | 4075 | 4275 | 4475 | 4500 |

'