| DZ-S20NC全自动数控两端压着端子机 |
功能
Function | 电线定长切断（闭环控制）、两端剥皮（剥皮长度，深度数字设定，带剥刀退刀功能）、
两端半剥、压着位置数字设定、双端压着下沉结构）
Cut wire constant length(closed control),two side stripping(stripping length and depth are set digitally,with the function of sripping and withdrawing knife),two-side seni-stripping,crimping(with crimping and sinking mechanism) |
速度
Speed | 双端压着1.2秒/根（最短时）
Two-side crimping 1.2s/piece(shrtes) |
电线切断长度
Cutting length | 25mm——9999.9mm |
剥皮长度
Stripping depth | 1.5mm——6mm |
压着机
Crimping machine | 19.600N(2.0ton)低噪音
19.600N(2.0ton)low noise |
电源
Prower source | AC220v 50HZ 单相8A
AC220v 50HZ single phase 8A |
电线尺寸
Wire size | 0.08~0.5mm2(AWG#10-#26)电线外径￠1.8mm以下UL1007相当
0.08~0.5mm2(AWG#10-#26)External diameter of wire less than￠1.8mm UL1007equivalent |
切断长度精度
Cutting Accuracy | 切断长∠100mm公差0.5mm+（L*0.002）切断长≧100mm公差1.0mm+（L*0.002)
Cutlength∠100mm tolerance 0.5mm+(L*0.002)Cutlength 100mm tolerance 1.0mm+(L*0.002) |
剥皮深度
Stripping depth | 最大调整量3mm（300step:lstep=0.01mm）带剥皮退刀功能
Ma*madification volue 3mm(300step:lstep=0.01mm)with the function of stripping and withdrawing knife |
检测装置
Detector | 空气压力低、电线有无、电线过负荷、电线送机异常、剥皮不良、压着不良
Low air pressure.with or without sire.overload on wire.wire feeding problem.improper stripping.improper crimping |
压缩空气
Compressed Air | 0.5Mpa(5kgf/cm2)约90NL/min(请使用清洁干燥空气）
0.5Mpa(5kgf/cm2)Approximately 90NL/min(use clean and dry air) |
机械尺寸、质量
Dimension.Mass | 980W*700D*1430H(mm）（不含突起物）约560kg
980W*700D*1430H(mm)(notincluding raised articles)approximately 560kg |
选购件
Option | 卷纸机、表示燈（3色，带蜂吟），皮带收线机，端子有无，端子过负荷感应器，送线机
（WRS20DR),端子履带不切断装置，压着机冷却风扇，1mm剥皮对应刀
Paper rolling machine indicator(thee colls,with beep),wire collecting machine,with or without terminal,overload sensor wire feeding machine(WRS200DR)terminal track not cutting machine,cooling fan for crimping machine,1mm sripping corresponding knife |
