● 性能特点
NO.1 AAS(Optional):Accurate Alignment System,operator may simply put the sensor close to the first mark and it will read all the marks all by itself,which is much faster and more convenient then the other systems which seem similar to our system.
自动定位系统(选配):此装置能自动侦测定位点,自动生成精准循边切割路径.
NO.2 Roller:high precision imported Roller,it has long working life and assures no offset feeding long distance.
进口钢刺送纸辊,长幅走纸不偏移,使用寿命长.
NO.3 Carriage: steel frame with linear bearing,it is with more cutting pressure which is adjustable easily,and it is good in heat dispersion.
全金属直线轴承笔车,刀压大且调节精细,散热性好.
NO.4 Tool Carrier:unlike ordinary ones,our Carrier has 3 bearings inside which makes the tool turning more steady and flexible.
内置三个轴承,刀具运转更灵活,稳定性更好.
NO.5 DSP:The DSP controller comes with fast processing speed and excellent stability. It is quite as driven by high subpided constant electricity flow.Built-in Close compensation,Sharp Angle compensation and Coreldraw,CAD direct output.
DSP处理器,运算速度快,高细分恒流驱动噪音低,系统更稳定.
NO.6 USB:Available with both U flash disk and USB cable,meets users prefer either online or off-line communicating.
标准USB接口,数据传输更稳定,支持U盘直接输出.
NO.7 Frame:the machine frame is made of aviation aluminum profiles,which is strong and assures steady cutting especially during fast processing.
全航空铝型材机身,高速度运行更平稳.
NO.8 Pressure Bar:the pressure is adjustable so it is much easier to cut thicker material.
压纸轮具有二级压力调节,使较厚材质切割变得更加轻松.
NO.9 Guiding Device:to free users from troubles,we try our best to take care of every particular,for example the guiding device,it guides and protects the wire effectively.
导向套件:此装置可以引导、保护信号线,提高信号线使用寿命.
NO.10 Scale Plate:it is helpful to measure the material size easily.
标尺:此装置方便了用户测量材料尺寸.
NO.11 Strip Sticker: it helps much to fix the strip tightly for long term use,our users are very happy for this little but useful device.
压条胶带:用于固定压条,确保长期使用,压条不变形、不脱离.
'
