McDaniel All Stainless Steel Gauges 11/2“, 2“, 21/2“, 4“ and 6“
0 130% full scale pressure without loss of accuracy.
0 15,000 cycles of pressure pulsation from 10% to 90% full scale at a rate of 60 times a minute. The gauge is allowed to rest for 5 minutes and then can have no greater error than 1% above it’s original accuracy as stated above; at any place on the dial.
Pulse/Vibration Protection
McDaniel offers liquid-filled gauges for appli-cations involving vibration or pulsation. Glycerin is an excellent damper of bourdon tube movement. Emersion of the entire measuring assembly in a protective liquid envelope pro-vides lubrication and shuts out corrosive or dirty atmospheres –– thereby minimizing wear of moving parts and prolonging gauge life signifi-cantly.
Choice of Mounting Style
Standard | Solid Front/ |
|
Bottom Connection | Blow-out Back (S) | Rear Flange (R) |
U-Clamp |
| Front Flange |
Panel Mount (U) | Back Connection (L) | Panel Mount (P) |
Choice of Scale
McDaniel offers from inventory many dual scale ranges. These include psi/kPa with the psi scale primary and kPa secondary; psi/Bar with the psi scale primary and Bar secondary; psi/kg/cm2 with psi primary and kg/cm2 secondary; kg/cm2/psi with kilograms per cm2 primary and psi secondary.
A word about Non-Standard Ranges: McDaniel offers more ranges and special calibrations than any other manufacturer of gauges –– for only a nominal charge if any. Consult your McDaniel distributor.
How to Order by Code Number1. Select case style.
2. Select pressure range (Describe if requesting inches of water column, mercury, etc.).
3. Add mounting style if other than a standard bottom connection.
4. Aaadd special configurations if needed –– either by code or by written description.
5. Add choice of filling, if appropriate:
(GF = Glycerin Filled, SF = Silicone Filled, or FF = Fluorolube Filled)
Example: Model Range Type of Special Type of
Code Mounting Configuration Filling
E 6k P –– GF
Order: A 4" sealed gauge with a scale of 0 – 6000 psi, panel mounted/lower-back 1/4“ NPT connection, filled at the factory with glycerin (E6kP-GF).
