浙江省双燕设备有限公司主营“蓝翎”牌绣花机，专业研发、生产与制造电脑绣花机近20年。
★“蓝翎”GG系列平绣机主要功能及特点：
1、本机具有多头多针的机构，能同时刺绣多幅多彩的锁式线迹的平绣花样，并能实现自动剪线的功能。
2、可选择安装绳绣、雕孔刀、金片绣等装置实现刺绣盘带花样、雕孔花样、金片花样等功能。
3、电脑自动控制刺绣，无需人工干预，实现刺绣自动化、标准化。
4、刺绣完成某一种颜色或某一区域以后，机器会自动剪线，然后根据设置的要求进行自动换色或越框后继续刺绣。
5、根据花样的美观颜色配置，实现在刺绣时自动换色。
6、在刺绣过程中，出现面线、底线用完或断线情况，机器会自动停机报警，报告断线的机头位置。
7、花样文件输入到电脑内存以后，可以永久保存，储量容量最少100万针，最多可以存储200个花样。
8、输入的花样格式为国内外标准的三进制、二进制及ZSK制式的磁盘文件格式，通用性很强。
9、绣框移动导轨利用新型高耐磨的圆导轨系统，具有寿命长、故障率低、运动平稳、磨损小、噪声小等特点，耐磨性比高强度的尼龙高出3倍。
10、绣框驱动采用步进电机细分驱动电路，移动框架平稳。
★“蓝翎”GG系列平绣机主要技术参数：
额定转速：750转/分 最高转速：850转/分
主要电机：变频电机1个或交流伺服电机1个，混合式步进电机2个
电源：三相380V 单相220V 50/60HZ 功率：2.5KVA
配金片绣：规格为φ3、φ5、φ7
金片绣额定转速：600转/分 最高转速：700转/分
LanLing Embroidery Machine
★Main Function and Characteristics:
1.The machine has the setup of many head and many needle,it can embroider several chain stitch flat designs at the same time,and can realize the function of auto trimmer.
2.Cording devices attachment,can embroider cording designs;Boring device attachment ,can embroider boring designs;Sequin device attachment,can embroider sequin designs.
3.Automatic controlled embroidery,no need of manual operation,makes the embroidery automatization and standardization.
4.Auto trimming after one color or one area finished,then it will change the color or keep on sewing according the setting.
5.Set the colors based on the designs,realize the auto color change.
6.Auto thread breakage detect stops when there is a thread break on upper thread or when the under thread is used up.
7.After the designs input,they can stay forever long.The large memory storage up to 1,000,000stitches and 200 designs.
8.Vast flexibility to design formats suitable for DST,DSB and DSZ.
9.High accurate liner guide system used in the panto-graph guide can reduce the fault,abrasion and noise,
move more smooth,and survive for long time,and its wearable ability is 3 times higher than nylon.
10.AC servo motor driver used in the panto-graph drive let the movement fast and smooth.
★Main Parameter:
Rating speed:750rpm Max speed:850rpm
Main motor:AC servo motor 1 set;Panto-graph drive motor:AC servo motor 2 sets
Power:Three phase 380V Single phase 220V/60HZ Consume: 2.5KVA
Sequin device size:φ3、φ5、φ7
Sequin rating speed:600rpm Sequin max speed:700rpm
