 Click here for the comparison chart of MGM motors.
Main Features - All motors designed for inverter duty
- Single Speed / Two Speed
- Totally Enclosed Fan Cooled (TEFC)
- Dimensional Standards per IEC (Metric)
- Continuous duty
- Engineered design
- Oversized brake disc for high brake torque or long lasting (reduced maintenance)
- Manual Brake Release
- Fine brake torque adjustment
- AC (3-ph.) brake - High Brake Torque/Very fast reaction Time
- DC brake (single ph. with built-in rectifier)
- Brake Terminals Connected with Motor Terminals or on a Separated Terminal Block
- Electrical Standards per NEMA-MG1
- Compact or Oversized Conduit Box
- Pressed-steel brake cover
- Molded plastic fan
- Extremely low rotor inertias
- Heavy-cycling application
- Hex Hole on NDE for manual shaft rotation with Allen Key
- cCSAus approved
- CE Mark for shipment into Europe.
- CCC approval for shipment into China
- Go to Product Catalogues
Insulation System - Phase insulators
- Vertical dipping
- Slot Liners
Mounting Configuration - Feet Integrated in the frame
- Foot Mount(B3)/Face Mount (B14)/Flange Mount (B5)
- Reduced or Increased flange/shaft size available
- Suitable for mounting in any position
Optional Features - Severe duty protection (Wash Down - Marine)
- 50 Hz for worldwide use
- Forced cooling for low frequency operation
- Thermostat or Thermistors (PTC)
- Classes H insulation
- Mounted encoder
- Drain Holes
- Micro-Switch detector (ON/OFF Brake - Brake wear)
Typical Applications - Standard Induction Duty Applications
- Rapid Cyclic Start/Stop
- Palletizers
- Packaging Machinery
- Conveyors
- Synchronized Systems
- Speed Regulated
- Winches
- Transfer Cars Stackers
- Crane Hoist/End Truck/Trolley Etc. See Applications Section
> >点击这里MGM电机比较图。
主要特点
所有电机设计的逆变器的责任
单速、双速
全封闭风扇冷却（TEFC）
尺寸标准IEC（公制）
连续工作
工程设计
过大的制动盘高制动转矩或长期持久的（减少维修）
手动松闸
良好的制动力矩的调整
交流（3-ph.）制动-高制动转矩/速度非常快的反应时间
直流制动（单博士内置整流器）
连接在电机端子或端子上分离制动终端
每nema-mg1电气标准
紧凑型或超大管箱
压型制动器罩
塑料成型机
极低的转子inertias
重循环中的应用
在无损检测与艾伦的关键手动轴旋转六角孔
ccsaus批准
运到欧洲的CE标记。
装运到中国CCC批准
去产品目录
绝缘系统
相位绝缘子
垂直倾斜
槽衬
安装配置
在框架中集成的脚
足贴（B3）/面山（B14）/法兰安装（B5）
减少或增加法兰/轴尺寸
适用于安装在任何位置
可选功能
严重的责任保护（冲洗-海洋）
50赫兹的全球使用
强迫低频运行冷却
恒温器或热敏电阻（PTC）
类H绝缘
安装编码器
排水孔
微动开关探测器（开/关制动闸瓦磨损）
典型的应用
标准感应负荷应用
快速循环启动/停止
堆垛机
包装机械
输送机
同步系统
速度调节
绞车
车辆堆垛机
起重机／端车/车等见应用部分 | 
