德国爱莎测试卡Esser test charts
东莞市泓晨光学科技有限公司
中国 东莞
产品属性
图文详情
品牌推荐
品牌
其他
型号
德国爱莎测试卡Esser test charts
IE全系列测试卡,高清、标清配套的透射式光源/反射式光源,与VLB-17HD光源兼容，兼容16:9及4:3测试卡。
NODESIGNATIONAVAILABLE
The test charts are available in the below-mentioned sizes. For technical reasons some charts cannot be manufactured in all sizes. Please do not hestitate to aks for additional information.
R E F L E C T I V E
| Picture size wxh [mm] | Chart size wxhxd [mm] | Visualization of the chart sizes (chart size ≠ picture size) | ||
| 4:3 | 16:9 | |||
| A1066 | 800 x600 | 1066.67 x600 | 1245 x 835 x 3.2 |  |
| A540 | 540 x 405 | 460 x 303.75 | 600 x 500 x 3.2 | |
| A460 | 460 x 345 | 460 x 303.75 | 600 x 500 x 3.2 | |
| A444 | - | 444.4 x 250 | 600 x 500 x 3.2 | |
| A360 | 360 x 270 | 360 x 202.5 | 500 x 400 x 3.2 | |
| K360 | - | 360 x 202.5 | 390 x 271 x 2.1 | |
| A280 | 280 x 210 | 280 x 157.5 | 365 x 305 x 3.2 | |
| K280 | 280 x 210 | 280 x 157.5 | 334 x 271 x 2.1 | |
| K180 | - | 180 x 101 | 204 x 164 x 2.1 | |
| K160 | 160 x 120 | 204 x 164 x 2.1 | ||
T R A N S P A R E N C Y
| Picture size wxh [mm] | Chart size wxhxd [mm] | Visualization of the chart sizes (chart size ≠ picture size) | ||
| 4:3 | 16:9 | |||
| D280 | 280 x 210 | 280 x 157.5 | 360 x 280 x 4.6 |
|
| D240 | 240 x 180 | 240 x 135 | 320 x 290 x 4.6 | |
| D240S | 240 x 180 | 240 x 135 | 360 x 280 x 4.6 | |
| D205 | 205 x 153 | 205 x 115.3 | 253 x 202 x 3.5 | |
| D120 | 120 x 90 | 120 x 67.5 | 155 x 135 x 4.0 | |
| D35 | 28 x 21 | 28 x 15.75 | 50 x 50 x 2.6 | |
Suitable transparent charts for the following illuminators
| D280 / D240S | D240 | D205 | |
| Spherical transparency illuminator LE6 Light box illuminator HCGX-001 Pattern Box or VLB-17HD | DNP SDCV-3500standard viewer OR HCGX-001 Light Box OR VLB-17HD | Porta Pattern spherical transparency illuminator | |
| With adapter | Spherical transparency illuminator LE6 Light box illuminator LG2 LV5 | Spherical transparency illuminator LE6 Light box illuminator LG2 LV5 |
NATIONAL AND INTERNATIONAL STANDARDS
Except where otherwise indicated our test charts fit the technical requirements of EBU,ITU, EIAJ, ITE and of camera manufacturers. Where test charts were measured and approved by broadcasting corporations or other institutions, these are noted. With standardized test charts the standard is indicated. The most important standards are:
- Pflichtenheft 8/1.1 -Richtlinien für die Messung der Pflichtenheftsbedingungen an Videogeräten
- IEC 61146 Video Cameras (PAL/SECAM/NTSC) - Methods of Measurement
Part 1: Non-broadcast single-sensor cameras
Part 2: Two and three-sensor professional cameras -
Part 3: Non-broadcast camera-recorders - Part 4: Automatic functions of video cameras and camera-recorders
- IEC 61966 Multimedia systems and equipment - Colormeasurement and management - Part 8: Multimedia color scanners
- EN 50132-2-1 CCTV surveillance systems for use in security applications
- ISO 12233 Photography-Electronic still picture cameras-Resolution measurement
- ISO 14524 Photography-Electronic still picture cameras - Methods of measuring opto-electronic conversion functions
- ISO 15739 Photography-Electronic still-picture imaging - Noise measurements
- ISO 21550 Electronic scanners for photographic images - Dynamic range measurements
- DIN 19045-1 Projektion von Steh- und Laufbild - Projektions- und Betrachtungsbedingungen
- DIN 19051-2 Testvorlagen für die Reprographie
DATA SHEET
SBBC61A
The flesh tone test chart is designed for evaluating the flesh tone rendition of electronic cameras. The chart developed by the BBC London is a four color offset print. The spectral remission of the flesh tones approximates the natural flesh tone very well.BBC61A BBC64
The BBC64 is designed for the accurate adjustment of camera flare corrections and setting of black level. Two 9-graduated counter current gray scales are arranged on a gray background. The gray scales being graduated logarithmically (gamma = 0.45).BBC64 BBC65
The BBC65 is designed to be used in conjunction with the test chart BBC6 A Flesh Tone Reference when very close color matching is required. BBC65 was developed to fulfill the need for a simplified studio test chart giving only the necessary information for routine day-to-day camera line-up in the shortest possible time. Black, white, gray fields and black lines with different frequencies are positioned on a gray background.BBC65Double Checker
Double-Checker
With the Siemens star TE148 on one side and the white balance sheet TE115 on the other, this target is a practical and essential tool for every cameraman. The neckband is a practical way to use it easily for the daily work.TE115 A
TE148 16:9 AQA-61QA-61
Includes a slanted edge, an alphanumeric resolution chart, a Landolt Ring chart, and gray step patches. Horizontal, vertical and slanted Ronchi patterns are provided at 6 to 40 c/mm. Applied Image has also provided (as permitted in section 4.1.2 of the standard) a T-100 Digital Electronic Pixel Target which has horizontal, vertical and slanted bars in widths from 0.1 to 1.0 mm (width to length ratio is 1:5).QA-61 AQA-62QA-62
Includes a dark gray 25 mm square rotated 5 degrees (CW) on a gray field. Surrounding grayscale patches change in discrete steps from white to black. Twenty patches are provided, measuring 9x9 mm each. The four corner-crosses measure 2.625" (66.68 mm) center to center. The upper right grayscale patch is equal in density to the background of the rotated square (0.50 density). The lower left grayscale patch is equal in density to the center rotated square (1.10 density).QA-62 AT01B
T01B16:9
The T01 is designed to measure geometry of cameras and monitors. Circular rings are arranged in a grid in such a way that at ideal geometry their center points are located in the intersection points of a grid raster of lines of an electronic test generator (black surrounding).T01B A
T01B 16:9 A
T01B D
T01B 16:9 DT01W
T01W 16:9
The T01 is designed to measure the geometry of cameras and monitors. Circular rings are arranged in a grid in such a way that at ideal geometry their center points are located in the intersection points of a grid raster of lines in an electronic test generator (white surrounding).T01W A
T01W 16:9 A
T01W D
T01W 16:9 DT03
The T03 is designed for evaluating the uniformity of a TV camera´s modulation depth. Between the line raster rows two white bars of different lengths are arranged on a black background (upper part) resp. two black bars of different lengths are arranged on a white background (bottom part).T03 A
T03 DT04
T04 16:9
The bar test chart is designed for checking the transmission characteristics of TV cameras at intermediate and deep frequencies. It consists of horizontal bars as a white-on-black and black-on-white background pattern.T04 A
T04 16:9 A
T04 D
T04 16:9 DT05
The T05 test chart is designed for general (visual) appraisal of TV cameras. It consists of gray wedges, MHz line rasters and geometry circles.T05 A
T05 DT06
Chess Board Test Chart
The T06 test chart is designed for checking geometry and resolution. It is composed of black and white square fields which are surrounded by rectangular fields at the edges which correspond to the grid raster lines of electronic test generators.
T06 DT06A
The T06 test chart is designed for checking geometry and resolution. It is composed of black and white square fields which are surrounded by rectangular fields at the edges. With the aid of sector stars and horizontal resp. vertical line rasters resolution and back focal distance can be measured.T06A A
T06A DT07
T07 16:9
The T07 is designed for evaluation of the halftone reproduction and of the frequency response and the modulation depth of electronic cameras. It consists of a line raster and counter current gray scales.T07 A
T07 16:9 A
T07 D
T07 16:9 DT10A
The T10A is designed to measure overall flare of camera systems. In the center of the chart is a black area surrounded by a white area in a way that the average picture level is 50%.T10A A
T10A DT10B
The T10B is designed to measure localized flare of camera systems. In the center of the chart is a black area surrounded by a white area in a way that the average picture level is 99%.T10B A
T10B DT13
The T13 is designed for checking color and neutral gray reproduction, relative modulation depth, gradation and granularity of film material for television. On a neutral gray background three groups of test components (grays, colors, resolution patterns) are arranged within the picture-relevant area.T13 A
T13 DTE42
Multi purpose chart for high speed camera testing
This chart contains everything you need to measure the OECF, dynamic range (contrast limited to 1000:1), color reproduction quality, white balance, noise, resolution, shading, distortion, kurtosis.TE42 AT63
The T63 is designed for checking resolution characteristics and cross color interferences of TV cameras and TV transmission systems. On a neutral surrounding area four large zone plates are arranged. Each zone plate consists of concentric circular rings, with their width and distances decreasing outwards.T63 A
T63 DTE83
The TE83 is designed for the evaluation of the halftone reproduction of an electronic camera. Two 11-graduated counter current gray scales are arranged on a gray background. The gray scales being graduated logarithmically (gamma = 0.45).TE83 A
TE83 DTE84
The TE84 is designed for the evaluation of the halftone reproduction of an electronic camera. Two 11-graduated counter current gray scales are arranged on a gray background. The gray scales being graduated logarithmically (gamma = 1.0)TE84 A
TE84 DT87
EIAJ TC B1 amplitude measurement chart , hatched
The TE87 is designed to do video amplitude measurements. On a gray background there are white, gray and black patches in nine positions in the field.TE87 A
TE87 DTE88EIAJ TC B2 amplitude measurement chart vertical
The TE88 is designed to do video amplitude measurements. On a gray background there are white, gray and black patches in nine positions in the field.TE88 A
TE88 DTE89
The TE89 is designed to do edge effect measurements. In the center of the chart is a white cross surrounded by a large black area.TE89 A
TE89 DTE94
The TE94 is designed for checking resolution over the whole picture area. It consists of nine sector stars of 90 (black and white) sectors each. Resolution measurement with TV lines is independent from TV standard.TE94 A
TE94 DTE95
The TE95 test chart is designed for general (visual) appraisal of electronic cameras. It consists of circular figures, multibursts, vertical wedge-sharped rasters, diagonal lines and gray scales.TE95 A
TE95 DTE96
The TE96 is designed to measure aperture dependent resolution in the field. There are nine areas with frequencies from 30-1000 TV-lines in horizontal, vertical and diagonal directions.TE96 A
TE96 DTE97
The TE97 is designed for the measuring and quick (most visual) appraisal of transmission characteristics of high resolution non-broadcast cameras. In addition to other features, it contains gray scales, multibursts and resolution wedges with different frequencies (vertical and horizontal).TE97 A
TE97 DTE98 16:9
The TE98 is designed to do a geometrical camera alignment. It consists of one big center circle and eight circles in the field. Further on there are resolution wedges in nine positions horizontal/ vertical.TE98 A
TE98 DTE99
The TE99 is designed to measure frequency response of the modulation depth of electronic cameras. A line raster is arranged in the center of the test chart which produces frequencies of 0.5 to 10 MHz in the output of the TV camera. Bar rasters are located in the corners of the test chart and produce frequencies of 0.5 and 5 MHz.TE99 A
TE99 DTE100
TE100 16:9
The TE100 is designed for the adjustment camera lenses, checking back focal distance and resolution, and establishing cushion and barrel distortion. It consists of a Siemens star, outlined arrows and several black and white line pairs.TE100 A
TE100 16:9 A
TE100 D
TE100 16:9 DTE101
The TE101 is designed for the general (visual) appraisal of TV cameras. The circular figures and the grid make a rough appraisal of the geometry possible. The wedge-shaped line rasters are used for the visual appraisal of the resolution limit. The gray scales are designed for the evaluation of the halftone reproduction.TE101 A
TE101 DTE102
TE102 16:9
The TE102 test chart is designed for checking the geometry, resolution and uniformity of signal generation. It is composed of black and white square fields. Two resolution wedges in the middle of the chart allow for the checking of vertical and horizontal resolution.TE102 A
TE102 16:9 A
TE102 D
TE102 16:9 DTE103
The TE103 is designed for resolution measurements, mainly for visual tests. It consists of eight rows with each six fields of multiburst of frequencies (1-6 MHz).TE103 A
TE103 DTE104
The TE104 is designed for resolution measurements, mainly for visual tests. It consists of four rows, each with six fields of multiburst frequencies (1-6 MHz).TE104 A
TE104 DTE105 16:9
The TE105 test chart is designed for the general (visual) appraisal of 16:9 TV cameras. It consists of circular figures, gray scales, wedge-shaped line rasters, zone plates, a grid, diagonal and horizontal lines.TE105 A
TE105 DTE106 / N
TE106 16:9
The TE106 is designed for checking the color rendition of TV cameras. The picture area is pided into six color bars showing the three primary colors red, green and blue and the secondary colors cyan, yellow and purple; in addition there is one bar of white and black. The succession corresponds to that of an electronically generated color bar.TE106 A
TE106 16:9 A
TE106 D
TE106 16:9 D
TE106N D
TE106N 16:9 DTE107
TE107 16:9
The TE107 is designed for checking the frequency response and the uniformity of an electronic camera. A line raster is arranged in the center of the test chart which produces frequencies of 0.5 to 10 MHz in the output of the TV camera.TE107 A
TE107 16:9 A
TE107 D
TE107 16:9 DTE108
The TE108 is designed for the evaluation of the halftone reproduction of an electronic camera. Two 9-graduated counter current gray scales are arranged on a gray background. The gray scales being graduated logarithmically.TE108 A
TE108 DTE109
The TE109 is designed for the evaluation of the halftone reproduction of an electronic camera. Two 5-graduated counter current gray scales are arranged on a gray background. The gray scales being graduated logarithmically.TE109 A
TE109 DTE110
The TE110 is designed for the adjustment of camera lenses, checking back focal distance and checking resolution over the picture area. The test chart consists of nine sector stars. Within the sector stars are two circular lines, which mark a 625 and a 312 line structure 525 / 262 in the NTSC version).TE110 A
TE110 DTE111B
TE111B 16:9
The TE111 flesh tone test chart is designed for
evaluating the flesh tone rendition of electronic cameras. The picture shows the portraits of three women with ideal and critical flesh tones.TE111B A
TE111B 16:9 A
TE111B D
TE111B 16:9 D
TE112
TE112 is designed for operational adjustment and control of TV cameras. It consists of circles permitting rough visual appraisal of scan linearity, grid lines serving the purpose of adjusting registration and wedges serving the purpose of resolution appraisal.TE112 A
TE112 DTE113
TE113 16:9
The TE113 is designed for checking the resolution characteristics and “cross color” interferences of TV cameras and TV transmission systems. The test chart shows a zone plate over the whole image area where the spatial frequency of the rings has a linear increase towards the edges. The line grid marks the spatial frequency in vertical and horizontal direction.TE113 A
TE113 16:9 A
TE113 D
TE113 16:9 DTE114
The TE114 is designed for checking the resolution characteristics and “cross color” interferences of TV cameras and TV transmission systems. The test chart shows a zone plate over the whole image area where the spatial frequency of the rings has a linear increase towards the edges.TE114 A
TE114 DTE115
TE115 16:9
The TE 115 chart is designed for white balance. The density of the white area is 0.15 (based on BaSO4=0). This corresponds to a remission of 70%.TE115 A
TE115 16:9 ATE116 16:9
The TE116 is designed for the operational adjustment and control of HDTV cameras. It consists of circles permitting rough visual appraisal of scan linearity. Lines serve the purpose of adjusting registration and wedges serve the purpose of resolution appraisal.TE116 16:9 A
TE116 16:9 DTE117 16:9
HDTV Universal Test Chart
The TE117 is designed for the quick (mainly visual) appraisal of HDTV camera´s transmission characteristics. It consists of a gray background on which circles, gray scales, horizontal and vertical lines are positioned.
The TE118 is designed for checking the resolution characteristics of HDTV cameras. Five fields with different line grids and black and white reference are arranged on a black background. The line grids are inclined in different angles.TE118 A
TE118 DTE120
The TE120 test chart is designed for the adjustment of camera lenses and checking back focal distance. It shows a 36 sector Siemens star on a white background.TE120 A
TE120 DTE121
The TE121 test chart is designed for the adjustment of camera lenses and checking back focal distance. It shows a 72 sector Siemens star on a white background.TE121 A
TE121 DTE122
TE122 16:9
The TE122 is designed for measuring registration errors in a CCD camera.TE122 A
TE122 16:9 A
TE122 D
TE122 16:9 DTE123
The TE123 is designed for measuring the behaviour of the chrominance channel expressed as the signal-to-noise ratio.TE123 DTE124 16:9
The TE124 is designed for checking the resolution characteristics of HDTV cameras.The test chart with an aspect ratio of 16:9 shows nine blocks containing 42 resolution patterns each in the middle area. The corner fields have 20 resolution patterns.TE124 16:9 A
TE124 16:9 DTE125 16:9
The TE125 zone plate test chart is particularly suited for the visual determination of the resolution of a high definition camera. It shows asymmetrically arranged one zone plate ranging from 0 to 600 c/ph and two zone plate sectors with their centers located in the left corners. The gore-shaped gaps are gray.TE125 16:9 A
TE125 16:9 DTE127 16:9
The TE127 is designed for evaluation of the halftone reproduction of electronic 16:9 cameras. Two 9-graduated counter current gray scales are arranged on a gray background. The gray scales being graduated logarithmically.TE127 16:9 A
TE127 16:9 DTE128 16:9
The TE128 is designed for measuring and quick (most visual) appraisal of transmission characteristics of high resolution non-broadcast cameras. It consists of a gray background, a white circle, gray scales, multibursts, resolution wedges with different frequencies (vertical + horizontal) circular rings.TE128 16:9 A
TE128 16:9 DTE129
The TE129 is used to measure low and intermediate frequency response (streaking) and flare in video systems. On a white background a black rectangle (width equal to 25% of picture width; approx. 0.05 MHz) and a narrow black pulse (width equal to 1% picture width; approx. 1.25 MHz) are shown.TE129 A
TE129 D
TE129 16:9 S
The TE129 with an additional 2T-pulse in the middle of the black 25%-pw-pulse.TE129 16:9S A
TE129 16:9S D
TE130
The TE130 is used to measure low and intermediate frequency response (streaking) and flare in video systems. On a black background a white rectangle and a narrow white pulse are shown.TE130 A
TE130 D
TE130 16:9 S
The TE130 with an additional black 2T-pulse in the middle of the white 25%-pw-pulse.TE130 16:9S A
TE130 16:9S D
TE131
The TE131 is designed for use with cameras which have a single action auto-registration facility.TE131 A
TE131 DTE132
This chart is designed to do resolution measurements. Five pairs of lines (black and white) with frequencies from 1-18 linepairs per millimeter are printed on a white background. The patterns are ordered counterclockwise in decreasing resolution on the chart.TE132 A
TE132 DTE133
The TE133 consists of a Siemens star with 36 sectors. Vertical and horizontal grids are arranged at the edges of the test chart. The test grid provides an appraisal of the illustration quality of optical systems like cameras, lenses, microfilm systems and amplification equipment.TE133 ATE134
The test grid is designed for the appraisal of the illustration quality of optical system like cameras, lenses, microfilm systems, amplification systems and many more. It consists of 11 groups each with four line grids which are arranged in the angles of 45°, 0°, 135° and 90°.TE134 ATE135
The test chart is designed for measuring the amplitude frequency response of the luminance channel, i.e. the amplitude of the output signal relative to a reference level as a function of frequency. A multiburst with different frequencies is shown on a gray background.TE135 A
TE135 DTE136
The TE136 is designed for resolution measurements. It shows patterns, based on three black bars on white ground, in horizontal and in vertical direction.TE136 A
TE136 DTE137
The TE137 is designed to do resolution measurements in a range of 2-0.5 linepairs per millimeter. Foucault patterns with horizontal, vertical and both types of diagonal resolution bw-bars are located in a matrix structure of 5 x 5 pattern on two different chart sheetsTE137 ATE138
The TE138 is designed for resolution measurements. Frequencies from 1-28.5 line pairs per centimeter are printed on a white background. The patterns are ordered clockwise in decreasing resolution on the chart.TE138 ATE140
The TE140 is used for evaluating the resolving power of a cine camera. It consists of several Siemens stars and resolution patterns.TE140 ATE142
The TE142 is designed for evaluating the resolution power of the film. It shows nine vertical and nine horizontal groups of line pairs. The gradation of these line pairs follows the factor √2.TE142 ATE143
The TE143 is designed to check the readability of document reproductions. In pattern number 84 the direction of the two lines inside the octagon must be recognized without problems for seven out of eight symbols.TE143 ATE144
The TE144 was developed in a private German testing laboratory and serves particularly for evaluating the frequency response of consumer camcorders. The test chart is subpided into 18 horizontal fields of bar patterns with different frequencies.TE144 A
TE144 DTE145Test Signal Test Chart, Line 17
The TE145 is designed for measuring several signal parameters according to the definitions set in CCIR Recommendation 569. It consists of a gray scale, a color gradient, gray and black bars of different sizes.TE145 DTE146
The TE146 reproduces the test signal, line 18 as specified in CCIR Recommendation 473. With the aid of measuring instruments test signals can be evaluated in a simple and partially automatic way. It consists of a multiburst with different frequencies.TE146 A
TE146 DTE147
The TE147 reproduces the test signal, line 18, as specified in CCIR recommendation 473. With the aid of measuring instruments test signals can be evaluated in a simple and partially automatic way. It consists of a multiburst with different frequencies.TE147 A
TE147 DTE148 16:9
The TE148 is designed for adjustment of camera lenses and checking back focal distance. It consists of a large Siemens star in the center and four smaller ones positioned in the corners of the test chart.TE148 16:9 ATE148 16:9 DTE149
The TE149 is designed for assessment of the image quality of scanning devices. It is composed of five test arrays with ISO test pattern no. 2, horizontal and vertical mm measuring scales of 19 resp. 28 cm length, each two horizontal and vertical length marking of 120 mm and 5’’.TE149 A
TE149 DTE150
The test pattern is designed for assessment of the image quality of scanning devices. The test chart is composed of different patterns and grids.TE150 A
TE150 DTE152
The TE152 is designed for checking the frequency response of a camera. The test chart shows vertical lines over the whole image area ranging from 1 to 8 MHz.TE152 A
TE152 DTE153
The TE153 is designed for evaluation of the halftone reproduction of electronic cameras. Two 11-graduated counter current gray scales are arranged on a gray background. The gray scales being graduated logarithmically. The contrast range of the gray scales is 40:1.TE153 A
TE153 DTE155
The TE155 is designed for evaluating the degree of the spurious image that remains after removing the still subject being shot. Therefore the black test chart has a transparent square in the center.TE155 A
TE155 DTE156
The TE156 is designed to measure blooming and smearing effects of CCD cameras. The transparency consists of a black area with a white (transparent) area. The transparent area has 1% of the picture area, marked by the white arrows.TE156 A
TE156 DTE157
The TE157 is designed for checking radial resolution of cameras. It shows a sector star with 180 sectors. One sector corresponds to an angel of 2° and has a black and a white beam.TE157 A
TE157 DTE158
Cine Test Chart with format markings for 1:1375 (35 mm), 1:166 (S16), 16:9 (HDTV), 1:185,1:2. Resolution power is given for three different enlargementsThe TE158 is designed for evaluating the image quality of film cameras and can be used for cameras of different formats. It consists of sector stars, several test elements, a linear gray scale, and a nine testcolor patch.TE158 ATE159
(0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6 MHz)
The TE159 is designed for measuring horizontal static resolution. It shows vertical bars, the density variation of which gives a sinusoidal video response.TE159 DTE161
The TE161 test chart is designed for adjustment of camera lenses and checking back focal distance. It consists of a large Siemens star in the center and four smaller ones positioned in the corners of the test chart.TE161 A
TE161 DTE162
The TE162 is designed to measure the amplitude frequency response of the chrominance channels. The test chart is a color multi-burst pattern, covering a spatial frequency range from 100 kHz to 1.5 MHz.TE162 A
TE162 DTE163
The TE163 is designed for measuring the contrast range of electronic cameras. The test chart shows two picture halves in neutral gray and black. The contrast range of both picture halves is 40:1.TE163 A
TE163 DTE165 16:9
The TE165 is designed for evaluation the halftone reproduction of 16:9 electronic cameras. Two 11-graduated counter current gray scales are arranged on a gray background. The gray scales being graduated logarithmically. The contrast range of the gray scales is 40:1.TE165 16:9 A
TE165 16:9 DTE166 16:9
The TE166 is designed for operation alignment and checking of electronic cameras. The circular lines allow a rough visual appraisal of the geometry. The grid lines serve for adjusting registration errors. The wedges are used for assessment of the resolution.TE166 16:9 ATE166 16:9 DTE167 16:9
The TE167 test chart is designed for general appraisal of HDTV cameras. It consists of gray scales, circular figures, a grid, sector stars, multibursts and resolution wedges.TE167 16:9 A
TE167 16:9 DTE169
TE169 is designed to measure color reproduction. The chart consits of 18 color patches and six patches from white to black.TE169 ATE170
The TE170 chart is designed to measure resolution of still cameras. It contains resolution wedges up to 2000 lines per picture heigt. Furthermore it contains slanted edges for SFR measurements.TE170 A
TE170 DTE173
TE173 16:9
The TE173 is designed for measuring aliasing. The test chart consists of rectangular bars which spatial frequencies depend on the picture width used.TE173 A
TE173 16:9 A
TE173 D
TE173 16:9 DTE174
The TE174 is designed for determining the relative horizontal and vertical offset which can exist between the primary R, G, B signals. The test chart has 14 horizontal and 19 vertical black lines (width of 1.3% of the picture height) on a white background.TE174 A
TE174 DTE175
The TE175 is designed for measurement of the disturbance caused to the video level in black areas to the right of or below the areas. Horizontal white lines are positioned on a black background.TE175 A
TE175 DTE176
TE176 16:9
The TE176 is designed for measuring resolution of electronic cameras. The test chart consists of alternating black and white bars with sharp transition. Two groups of bars with video frequencies of 0.5 and 5 MHz are distributed over the picture area.TE176 A
TE176 16:9 A
TE176 D
TE176 16:9 DTE178
The TE178 is a white balacing test chart.TE178 DTE179
The TE179 is designed to measure registration of video cameras.TE179 A
TE179 DTE180
The IKEGAMI CPU-Chart is determined for setting up all IKEGAMI cameras which are switchable between 4:3 and 16:9 aspect ratio. Two 3-graduated counter current gray scales are arranged on a gray background with grid structure.TE180 A
TE180 DTE182
TE182 16:9
The TE182 is an 18% gray test chartTE182 A
TE182 16:9 A
TE182 D
TE182 16:9 DTE183
The TE183 is designed for operational adjustment and control of TV cameras. A grid structure is arranged on a white background. The grid permits rough visual appraisal of scan linearity and the lines serve the purpose of adjusting registration.TE183 A
TE183 DTE185
The TE185 is designed for automatical setup of Ikegami camerasTE185 A
TE185 DTE186
The TE186 is designed for automatical geometrical setup of Ikegami cameras.TE186 A
TE186 DTE187
The TE187 is designed for operational adjustment and control of TV cameras. It consists of circles permitting rough visual appraisal of scan linearity, a grid structure serving the purpose of adjusting registration and resolution wedges serving the purpose of resolution appraisal.TE187 A
TE187 DTE188
TE188 16:9
The TE188 was designed with respect of the well- known 'ColorChecker'. Used in photography, film and TV, the chart consists of 18 color patches and a 6-step gray scale.TE188 A280TE188 16:9 A280
TE188 A460TE188 16:9 A460
TE188 D
TE188 16:9 DTE192
The TE192 is designed for cameras without an integrated electronic saw tooth signal. It allows the gamma correction of the camera to be visualized on the oscilloscope. It shows a linear continuous progression from 0% to 100% transmission set on a gray background.TE192 A
TE192 DTE194
Aliasing Test ChartThe TE194 is designed for measuring aliasing. The chart consists of eight rows of rectangular bars with the spatial frequencies of 1, 2, 4, 6, 8, 10, 12 and 14 MHz.TE194 A
TE194 DTE195
The TE195 is designed for automatical setup of Ikegami cameras.TE195 A
TE195 DTE197 16:9
The TE197 is designed for evaluating the opto-electronic-conversion-function of a camera. The chart consists of a circular ordered 12-step-gray scale on a gray background.TE197 A 20:1
TE197 D 20:1
TE197 A 80:1TE197 D 80:1
TE197 A 160:1TE197 D 160:1
TE197 D 1000:1TE197 D 4000:1TE199
The TE199 is designed for acurate resolution measurement. The chart consists of six rows with each ten fields of rectangular bursts.TE199 A
TE199 DTE200
The SONY HDTV Setup Test Chart is determined for setting up all Sony cameras which are switchable between 4:3 and 16:9 aspect ratio. It consists of a gray background with grid structure and two 3-step-gray scales in center of the chart.TE200 A
TE200 DTE201
The TE201 is designed for automatical setup of Ikegami cameras.TE201 A
TE201 DTE202
The TE202 is designed for adjustment of camera lenses and checking back focal distance.TE202 A
TE202 DTE203
TE203 16:9
The TE203 is designed to check cameras for quantization errors. It consists of a high and low contrast saw tooth.TE203 DTE204 16:9
The TE204 is designed to measure resolution of cameras. It contains sinusoidal multiburst patterns from 0.5-10 MHz.TE204 16:9 DTE205
The TE205 is designed to check the gamma setting of the camera. The chart shows ten gray steps from 1-10% transmission and ten gray steps from 10-100% transmission.TE205 DTE206
Flare Test Chart (Thomson No. 29299905)
The TE206 is used to measure flare of camera systems. A black rectangle is surrounded by a large white area.TE206 A
TE206 DTE207Resolution Test Chart (Thomson No. 4150089)
The TE207 is designed to measure resolution. It consists of multiburst patterns from 0.5-6.67 MHz in the center and the corners of the image.TE207 A
TE207 DTE209
The test chart is composed of the three primary colors Red, Green and Blue and the secondary colors Yellow, Purple and Cyan.TE209 ATE210
The TE210 is mainly designed for assessment of the neutrality of color reproduction. The test chart shows in its center a field of neutral gray with 18% reflectance and at its sides two small fields each with white of 90% and black of 3% reflectance.TE210 ATE211
The TE211 is designed for evaluating the brightness rendition and the neutrality of color rendition of cine cameras. Inside a white frame corresponding to the S16 aspect ratio six neutral gray fields are arranged. Their brightness is graded in a way to correspond to one lens stop each.TE211 ATE212
The TE212 is designed for evaluating the picture stability of film cameras.TE212 DTE213
The TE213 is used to set up film cameras and scanners. In the center is a Siemens star for focusing and there are several frames marked for different film formats.TE213 ATE214
The TE214 is designed for assessment of the color rendition of electronic cameras. It consists of a neutral gray background, a white field, a black field (super black hole) with a remission of < 0.5% and a second black field, where color patterns may be applied alternatively.TE214 A
TE214 DTE215
The TE215 is designed to measure the blooming effect of an electronical video camera. Therefore the black test chart contains a small rectangular window.TE215 A
TE215 DTE216
The TE216 is designed for determining the degree of crosstalk of FM-luminance sidebands into the down-converted chrominance band, being demodulated as unwanted color signals (the socalled 'cross-color').TE216 A
TE216 DTE217
The TE217 is designed to measure the Y-C-offset. It contains a black center area surrounded by white space and four green patches around that on a gray background.TE217 DTE218
The TE218 is designed to check the autofocus system of a camera. It consists of two different sizes of Siemens stars.TE218 ATE219
The TE219 is designed for noise measurement of still video. It consists of circular and horizontal positioned gray fields, one gradient field and one field containing a diagonal multiburst with different frequencies.TE219 A 80:1
TE219 D 80:1
TE219 A 1000:1TE219 D 1000:1
TE219 D 160:1TE220
The TE220 is designed for adjustment of camera lenses and checking back focal distance. It consists of a large Siemens star in the center an four smaller ones positioned in the corners of the test chart.TE220 A
TE220 DTE221
The TE221 is designed to calibrate the color reproduction of a scanner. 264 color patches and 22 gray patches are on the chart.TE221 ATE222 16:9
The TE222 is designed to measure color resolution of HD cameras. R, G, B, BY and MC multiburst patterns from 2 MHz to 20 MHz are on the chartTE222 16:9 A
TE222 16:9 DTE223 16:9
The TE223 is designed for evaluation of the halftone reproduction of electronic cameras. Two 13-graduated counter current gray scales are arranged on a gray background. The gray scales being graduated logarithmically.TE223 16:9 A
TE223 16:9 DTE224 16:9
The TE224 is designed to measure and describe the frequency response of an electronic HDTV camera. The test chart consists of 50 multi burst fields, which are distributed over a 16:9 picture area. The fields are arranged in horizontal and vertical direction to measure resolution in both directions.TE224 16:9 A
TE224 16:9 DTE225 16:9
The TE225 is designed to measure and describe the frequency response of an electronic HDTV camera. The test chart consists of 32 multiburst fields, which are distributed over a 16:9 picture area. The fields are arranged in horizontal and vertical directions in order to measure the resolution in both directions.TE225 16:9 A
TE225 16:9 DTE226 16:9
The TE226 is designed for the evaluation of the color rendition of HDTV cameras. The chart consists of 36 color patches and a 9-step gray scale. In addition to the primary and secondary colors the test chart contains mainly the colors, which are critical in reproduction, e.g. dark and light skin tones, foliage, blue sky, orange, violet and others.TE226 16:9 DTE229
The TE229 is designed to check colors of a camera. A circle of 30 different colors and four patches with the colors white, gray, green and blue are on the chart.TE229 ATE230
The Digital ColorChecker Semi Gloss (SG) is specifically designed to meet the needs of digital photography. It consists of 140 patches, includes standard ColorChecker, skin-tone reference colors and gray scale steps. It is mounted on an aluminium plate.TE230 ATE231 N 16:9
The TE231 is designed for checking the frequency response of HDTV cameras. The test chart shows vertical lines over the whole image area ranging from 100 to 1200 lines.TE231 16:9 DTE232 16:9
The TE232 is designed for the evaluation of the halftone and color reproduction of an electronic camera. Two 11-graduated counter current gray scales are arranged on a gray background (graduated logarithmically) and there are two color patches representing the three primary colors as well as the three secondary colors.TE232 16:9 ATE233 16:9
The TE233 is designed for measuring the color reproduction of HD cameras, for selective color correction and for making color reference shootings for post production. The chart is composed of color patches including the three basic colors, the secondary colors and patches with four skin tones.TE233 16:9 ATE234 16:9
The TE234 consists of different color grades. It is used to check quantization errors which result in visible steps in the grades.TE234 16:9 ATE235
The TE235 is desigend for the on-site testing of surveillance cameras. The chart roughly corresponds to the size of a person. It consists of different line pairs, a sector star, a gray scale and color fields. It is supplied with a tripod which allows the chart to be tilted and turned by 360°.TE235 ATE236 16:9
The TE236 is designed to measure lens breathing. This means a change of the focal length (the reproduction scale of the scene) of the lens just by changing the focus point. It contains three white vertical stripes on a black background.TE236 16:9 ATE237
The TE237 serves for checking resolution over the whole picture area. It consists of sector stars of 72 (black and white) sectors.TE237 A
TE237 DTE239 16:9
The TE239 is designed for checking the frequency response of the modulation depth and the uniformity of modulation depth of HDTV cameras. The test chart consists of multiburst fields, which are distributed over a 16:9 picture area. The fields are arranged in horizontal and vertical directions in order to measure resolution in both directions.TE239 16:9 A
TE239 16:9 DTE240
The TE240 is designed to check the 35 mm-scanner dynamic range. It has 24 graypatches with a density range of 4.0 or 6.0. The reflective version consists of a 2.4 density range.TE240 DTE241 16:9
The TE241 is designed to measure the characteristic curve of digital cameras. It is an extended OECF chart and has 20 patches and a contrast range of 10.000:1, 1:100.000, or if needed 1.000.000:1.TE241 16:9 DTE244
The TE244 is designed to check aliasing behavior of digital cameras.TE244 A
TE244 DTE245
The TE245 is designed to make a visual resolution analysis of digital cameras. It contains Landolt circles in different sizes.TE245 A
TE245 DTE246 16:9
The special star consists of four segments each with a different number of cycles. So it is possible to focus the wide angle and the tele position for an optimal adjustment of the focusing point. This is essential for positioning the flange focal distance without a special collimator.TE246 16:9 A
TE246 16:9 DTE248 16:9
The TE248 is designed to measure disortion of digital cameras. It contains a fine grid of black lines on white background.TE248 16:9 A
TE248 16:9 DTE249 16:9
The TE249 is designed to determine the macro capabilities of a camera-lens system.TE249 16:9 A
TE249 16:9 DTE250
USAF resolution test chart on fi lm in 35 mm is useable for scanner resolution up to 10.000 ppi.
TE251 16:9
The TE251 is designed to measure the distortion of digital cameras. It contains black crosses on a white background.TE251 16:9 A
TE251 16:9 DTE252
The TE252 is designed to measure resolution of digital cameras. It is described in the CIPA standard.TE252 A
TE252 DTE253
The TE253 is designed for checking resolution. The chart contains a radially sine modulated Siemens star in the center of the image, gray patches and black squares with a small white square in it.TE253 ATE253 9x
The TE253 is designed for checking resolution. The chart contains nine radially sine modulated Siemens stars, gray patches and black squares with a small white square in it, slanted edges and white noise patches.TE253A 9xTE255
The TE255 is designed to measure shading/ vignetting of a digital camera. It is a very precise milk glass which is used in combination with an integration sphere or a light box.TE255 DTE256 16:9
The TE256 is designed to color align HD cameras.TE256 ATE258
The TE258 is designed to characterise slide/ print scanners. It is suitable to create color management profiles for scanners.TE258 DTE259
OECF/Noise Chart with 20 gray patches contrast 10000:1
The TE259 is designed to check the dynamic range of broadcast cameras on a waveform monitor. It contains a gray step wedge with 20 patches and a contrast range of 10.000:1.TE259 DTE260 16:9
Dot Chart
The 'dot' chart consists of two different charts on the front side and on the back side. One of them has 31 lines of dots and the other 15 lines of dots. They can be used to determine distortion and chromatic
aberration.TE260 ATE261 16:9Slanted Edges
This target has a tilted checkerboard in the background and five low contrast slanted edges together with surrounding gray patches in the front. It is used to determine the SFR of digital capture devices and is our default chart in combination with the AF-Box and STEVE.TE261 ATE262
The Universal Test Target is designed to evaluate the image quality of scanners and other digital input devices used to create the digital images of documents, photos and other reflective media.TE262 ATE263
The chart consists of gray steps, color patches, a scale and resolution pattern. It allows automatic analysis of each scanned page and, in combination with the right software, provides information for the purpose of showing when a specific page happens to be out of specs. TE263 ATE264 16:9
The former OECF chart contains 12 or 20 gray patches in a circular order and three different patterns in the center of the chart. The current version of the OECF chart skips the center patches due to the sometimes occurring straylight. This chart is also offered as TE264X where the 20 gray patches are not rasterized as in the standard version of the chart but done with nearly no structure on a very fine grained film.TE264 D 10.000:1
TE264 D 100.000:1
TE264 D 1.000.000:1
TE264X D 10.000:1TE265
This chart contains a so-called dead leaves (in this case circles) structure. The structure is made up of circles in all sizes and gray levels. It is used to determine the Dead Leaves SFR, an approach to describe the loss of low contrast fine details.TE266
The DIN 19051 provides a test chart to calibrate a microfilm production chain. They can be mounted on a plastic backing to put on a table or hung up on whatever kind of mounting is available. In contrast to the existing standard our new default chart TE266 will use the line pair target known as ISO 19051 pattern No 2 because it is more intuitive to evaluate and more widely used. But on request Image Engineering offers the original version with ISO 19051 pattern No 1.TE266 DTE268
The TE268 is designed for resolution and sharpness measurements. 25 sinusoidal modulated Siemens stars, 16 slanted edges at four different contrasts, four colored dead leaves structures and rope structure images are placed on the chart. A very detailed analysis over nine different image heights is possible with this chart. The chart has an aspect ratio of 4:3 (image size of 810x1080 mm) or 3:2 (image size of 810x1215 mm). It is suitable for systems from 2 MP up to 180 MP.TE268 ATE269
For high dynamic range cameras, the OECF charts with patches calculated according to ISO 14524 are not that convincing. Densities are calculated according to the cube root formula result in large steps in the high-density patches. Image Engineering’s solution for the problem is the TE269, a 36 patch OECF chart which basically follows ISO 14524 but implements additional steps especially at higher density levels.
TE269 D 1.000.000:1
TE270X
The TE270X chart is similar to the TE264 but it is equipped with two polarizing filters in the center of the chart. For cameras that do not allow a manual adjustment of the exposure, the automatic exposure control (AEC) is fooled by modifying the density (transmission) of the central part of the test chart. This feature is needed especially for low-end cameras and camera modules in mobile devices that often do not have a manual exposure adjustment.TE270X D 10.000:1
TE271
