【原装正品，大量现货】
全称：东莞市百鑫机电有限公司
联系人: 陈 雄 雁
手机：15322996757
QQ：2217963301
固话：0769-3383 8845
传真：0769-2233 4100
邮箱e-mail：2217963301@qq.com
一级代理商：三菱低压电气
ABB低压电气
S-N系列电磁接触器
接触器主要用于交流频率50Hz和60Hz，额定电压至1000V，额定电流至800A的电力系统中接通和分断电路，可与适当的热过载继电器或电子式保护继电器组合成电动机起动器，以保护运行中可能发生过载的设备。
可精确控制您的马达
使用10AF至35AF的CAN端子，使接线简便、安全。
浪涌吸收器可嵌入35AF或更低级的机型，对于50AF或更高级的机型可用交流操作直流电磁激励控制浪涌。
不可逆式接触器
采用新型集成端子盖，具备指触保护安全特性并减少高达50%的线圈库存。而且适用于微小负载。同产品中体积最小。取得各项国际认证
可逆式接触器
适用于交流马达正向或逆向旋转，如输送线。
采用机械联锁，安全性更佳。
机械闭锁型接触器
采用了机械锁存继电器，在切断电源等情况时仍可维持功率恒定。
适用于配电板、建筑核心系统的记忆电路以及其他用途。
马达起动器
可保护您的马达免受风险。
使用10AF至35AF的CAN端子，使接线简便、安全。
浪涌吸收器可嵌入35AF或更低级的机型，对于50AF或更高级的机型可用交流操作直流电磁激励控制浪涌。
开放型不可逆式马达起动器
适用于马达起动和停止切换以及防烧毁保护。
符合日本以及诸多国际标准的标准机型。
开放型可逆式马达起动器
适用于交流马达正向或逆向旋转，如输送线。
采用机械联锁，安全性更佳。
机械闭锁型马达起动器
采用了机械锁存继电器，在切断电源等情况时仍可维持功率恒定。
适用于配电板、建筑核心系统的记忆电路以及其他用途
延时接通型磁力接触器
在瞬时断电期间通过电容器放电让电持续流动1-4秒。
在电源恢复时，启用连续负载控制。
封闭型马达起动器
马达起动器封闭在盒体内，可防止电击或灰尘积聚。
配有按钮，可轻松打开及关闭。
带专用热过负载继电器的马达起动器
该产品阵容的特色是可以保护起动时间长或热容低的马达。
固态接触器
用于马达和加热器负载的固态接触器
适用于如输送线等具有高切换率的马达负载。也适用于加热器负载。
用于加热器负载的固态接触器
专用于加热器负载的固态接触器。适用于注塑、半导体制造设备等中的加热器负载。
MS-N系列的理想伙伴
易于安装至接触器、继电器和热过负载继电器。
众多具有高可用性和高安全性的选配部件。
马达起动器和接触器用选配部件和配件
辅助接点单元、浪涌吸收器和端子盖等。
继电器用选配部件和配件
浪涌吸收器和端子盖等。
热过负载继电器用选配部件和配件
独立安装单元和连接导体等。
固态接触器用选配部件和配件
故障检测单元、可逆单元和电池盒护罩等。
S-N series electromagnetic contactor
Contactor is used in AC frequency 50Hz and 60Hz, rated voltage up to 1000V,making and breaking the circuit power system rated current up to 800A, andappropriate thermal overload relay or relay combined protection of electronictype motor starter, in order to protect the operation may have been borneequipment.
The motor can be controlled accurately you
The CAN terminal using 10AF to 35AF, so that the wiring is simple, safety.
The surge absorber can be embedded into 35AF or more low-level models, to control the surge 50AF or more advanced models available AC operated DCelectromagnetic excitation.
Irreversible contactor
Using the new integrated terminal cover, with the characteristics of safety protection and reduce the finger touch coil stock up to 50%. And suitable for small load. The same product in the smallest volume. To obtain theinternational certification
Reversible contactor
Suitable for AC motor forward or reverse rotation, such as conveying line.
The use of mechanical interlocking, better safety.
Mechanical locking type contactor
Using a mechanical latching relay in the power supply is cut off, and other circumstances to maintain a constant power.
Memory circuit suitable for core system board, building and other use.
Motor starter
Protect your motor against risk.
The CAN terminal using 10AF to 35AF, so that the wiring is simple, safety.
The surge absorber can be embedded into 35AF or more low-level models, to control the surge 50AF or more advanced models available AC operated DCelectromagnetic excitation.
Open type is not reversible motor starter
Suitable for motor start and stop switch and anti burn protection.
In accordance with Japanese and many international standards of thestandard model.
Open type reversible motor starter
Suitable for AC motor forward or reverse rotation, such as conveying line.
The use of mechanical interlocking, better safety.
Mechanical locking type motor starter
Using a mechanical latching relay in the power supply is cut off, and other circumstances to maintain a constant power.
Memory circuit suitable for core system board, building and other use
Delay connecting type magnetic contactor
In the instantaneous power-off period through the capacitor discharge letelectrically continuous flow 1-4 seconds.
When power is restored, enabling continuous load control.
Enclosed type motor starter
The motor starter is sealed in the box body, and can prevent electric shock ordust accumulation.
Equipped with a button, can easily open and close.
With special thermal over load relay motor starter
The product lineup features can protect the start time is long or low thermal capacity of motor.
Solid state contactor
Solid state contactor for motor and heater load
Suitable for high switching rate of motor load with such as conveyor line etc..Also applies to heating load.
For solid state contactor heater load
Solid state contactor is dedicated to the heater load. Applicable to the heaterof injection molding, semiconductor manufacturing equipment in the load.
The ideal partner for MS-N series
Easy to install to a contactor, relay and thermal over load relay.
Many optional components with high availability and security.
The motor starter and contactor with matching parts and accessories
The auxiliary contact unit, surge absorber and a terminal cover etc..
By selecting components and parts relay
Surge absorber and a terminal cover etc..
Load relay for matching parts and accessories too hot
Independent installation unit and a connection conductor etc..
Solid state contactor with matching parts and accessories
The fault detection unit, and a battery box cover and other reversible unit.
