




环氧树脂停车场地坪 Epoxy resin parking floor
适用范围:
各种停车场适用,亦适用于磨损度较大的各种地面。
APPLlCATlON:
Applicable to a variety of parking, also applies to a greater degree of wear of the ground。
性能特点:
平坦无缝、耐磨耐压、防水耐油、抗冲击力强、可耐2—3吨叉车行驶及机器重压等特性;防滑性优越。
FEATURE:
Flat seamless, wearable pressure, water-proof oil, impact resistance, resistant to 2-3 ton forklift driving and machine weight and other characteristics; slip of the superior。
使用年限:
1.0mm-4年 2.0mm-6年 3.0mm-8年
SERVlCELlFE:
1.0mm-4 years of 2.0mm-6 in 3.0mm-8 years
施工工艺:
1、素地处理:打磨、除尘处理
2、封闭底涂:采用渗透性及附着力特强的环氧封闭底涂滚涂一道,增强对地面的附着力
3、砂浆中涂:在环氧树脂中加入适量的石英砂,用镘刀将其均匀涂布一至二道,增强地面
的耐压及抗冲击性能;
4、环氧面漆:用滚筒将环氧树脂面料滚涂涂于砂浆中涂之上,使地面防尘防水、耐磨耐腐
蚀;
5、保护层:用透明罩光漆滚涂一道,增强地面耐磨性,更好地保护地面;
6、施工养护:24小时后方可上人,72小时后方可重压。(25℃为准,低温开放时间需适度延长)
PROCESSlNG:
1, handling: grinding, dust removal process
2, closed coat: the permeability and strong adhesion of epoxy closed bottom roller coating, increasing the adhesion of the ground
3, in the mortar coating: add the right amount of quartz sand in epoxy resin, evenly coated with a trowel one to two, strengthen the ground
The pressure and shock resistance;
4, epoxy, epoxy resin with the roller fabric roller coating is applied in cement mortar and ground dust waterproof, abrasion and corrosion
The corrosion;
5, protective layer: use a transparent cover light paint roller coating to enhance wear resistance on the ground, to better protect the ground;
6, construction maintenance: 24 hours can be stepped back, rear can weigh 72 hours. (25 ℃, low temperature should be moderately open)
技术指标Technical index:
项目Project | 指标Index |
表干时间(h)Dry time(h) | ≤4 |
实干时间(h)Drying time(h) | ≤24 |
硬 度(H) Hardness (H) | ≥2 |
耐磨性500g/1000r,失重,g Wear resistance 500g/1000r, weight loss, g | ≤0.04 |
抗压强度(Mpa) Compressive strength (Mpa) | ≥55 |
耐油污Resistant to oil | 30天无明显变化30 days no significant changes |
耐冲击性(J/cm2)Impact resistance (J/cm2) | 1.8 |
防滑级别(级)Non-slip level (level) | 3 |