GFX-HL16/24 type optical fiber (optical splitter) wiring box is used for wiring device of optical loop terminal, can provide the optical fiber splice, terminal, the wiring anddistributing function. Mainly used in FTTH access mode under the corridor or outdoorbranch spot. One stage or two stage splitting for FTTH, two stage splitting especially obvious advantages. And the introduction of the bypass fiber connection function.
The characteristics of:
The corridor optical fiber distribution box (optical splitter wiring box) is composed of a box body, an optical cable fixing and protecting device, optical fiber welding disc,adapter, cable installation bracket disc introducing device, optical splitter component.Wall hanging type corridor optical fiber distribution box can meet the upper and lowercable inlet, the top of the box and the bottom configuration 4-6 line inlet hole, and the optical cable fixing and protection device should be able to meet the requirements of2-4 optical fiber cable and fixed.
The adapter adopts detachable slanting installation, plug freely, convenient installation; pigtail coiled natural smooth, large curvature radius, can greatly reduce the transmission loss of optical fiber, can adapt to the SC, FC, double LC adapter.
The optical fiber welding disc used to open the overturn structure can be superimposed expansion, convenient operation, and can be adapted to strip the cable splice; be able to adapt to the cold and hot melt, quick connector.
GFX-HL16/24型光纤（光分路器）配线箱是用于光环路终端的配线设备，可以提供光纤的熔接、终端、配线及分线功能。主要适用在FTTH接入方式下的楼道或户外分光点。适用于FTTH的一级或二级分光，二级分光优势特别明显。并且引入了旁路纤接续功能。
特点：
楼道光纤配线箱（光分路器配线箱）是由箱体、光缆固定及保护装置、光纤熔接盘片、适配器安装支架、光缆碟形引入装置，光分路器组成。壁挂式楼道光纤配线箱能满足上下进缆，箱体的顶部与底部配置4-6个进线孔，且光缆固定与保护装置应能满足2-4根光缆同时固定的要求。
适配器采用可拆卸式倾斜安装，插拔自如，安装方便；尾纤的盘绕自然平顺、曲率半径大，可以最大限度地减少光纤的传输损耗，能适应SC，FC，双LC适配器。
光纤熔接盘采用开启式翻转结构，可以叠加扩容，操作方便，并可以适应于带状光缆的熔接；能适应热熔、冷接及快速连接器连接。
光缆碟形引入装置采用梳齿结构，使皮纤光缆排列整齐，固定可靠，有外力作用时不致于破坏箱体内的光缆及适配器，而且检修维护方便。
箱门开启具有阻尼效应，可以停留在90-180度的任意位置上。
当分纤箱采用翻转背板结构时，翻转背板为可拆卸式，所在的外层背板翻转角度具有阻尼效应，可以停留在90-120度的任意位置上。
光缆分纤箱应考虑掏纤施工便利，光缆进线孔采用上下垂直缺口开孔（室内型）或椭圆开孔（室外型）。
Optical disc into device adopts a comb structure, make the skin fiber cable arranged orderly, reliable fixation, fiber optic cable and adapter with external force not todestroy the box body, and convenient repair and maintenance.
Open the door with a damping effect, can stay at any position on the 90-180 degree.
When the fiber box adopts the flip back plate structure, turning back is removable, the outer back flip angle where has a damping effect, can stay at any position on the 90-120 degree.
Fiber distributing box should consider cutting fiber convenient construction, optical cable wire inlet hole adopts upper and lower vertical gap opening (indoor) or ellipticalhole (outdoor).
