电厂专用低碳钢钉
其材料有上等钢材经机械加工而成，是电厂专用保温材料固定使用产品，施工配套碳钢钉专用锁片。
碳钢丝引用标准：Q235
碳钢钉产品的规格型号：Φ3.2mm Φ4mm Φ5mm Φ6mm
配套自锁压片规格型号：Φ40mm Φ50mm Φ60mm Φ68mm
新工艺：电厂保温采用低碳钢保温钉焊接保温工艺
其优点：简单、省工、省力、永不脱落。
施工方法：
1、清除固定表面杂质
2、使用时要注意周围环境是否有易燃物品
3、将打弯端焊接在固定面上，等焊接完毕，检查焊接是否牢固
4、将保温板固定在钉子上
5、配套自压锁片固定
6、将多余钉长弯折至平衡
low carbonsteel nails www.xinjie916.icoc.cc
It is processed of good quality steel bymechanical, is used to fix thermal insulation materials in power plants, form acomplete set of locking plate.
Low carbonsteel nails reference standard: Q235
specifications: Φ3.2mm Φ4mm Φ 5mm Φ 6mm
Formed complete set of self-locking tabletspecifications: Φ 40 mm Φ50mm Φ 60mm Φ68mm
Newtechnology: the power plant thermal insulation adopts low carbon steel nailinsulation welding process.
Its advantages:simple, save work, save effort, will never fall off.
Construction method:
1, clear impurities on fixed surface
2, payattention to the surrounding environment if having flammable items
3, weld thebending part on the fixed side, such as welding is completed, check whether thewelding is firm
4, the insulation board is fixed on the nail
5, fix the matching lock plate
6, bent the excess nail to balance
