Dynaloy (图)产品的具体介绍：
Dynaloy 特殊溶解剂 Dynaloy 灌封树脂和三防漆去除特殊溶解剂：Decap, Dynasolve 100,Dynasolve 165,Dynasolve 185,Dynasolve 190,Dynasolve 210,Dynasolve 218,Dynasolve 220,Dynasolve 225,Dynasolve 230,Dynasolve 699 ,Dynasolve 711,Dynasolve 750,Uresolve Blue,Uresolve 411 聚氨酯溶剂：Dynaflush，Dynasolve 180 ，Dynasolve CU-5，Dynasolve CU-6，Dynasolve Iso-Neutralizer ，Poly-Flush，PUR-Flush 100，PUR-Flush 200，PUR-Strip 300，UR-Away FL，Dynaflake 环氧树脂溶剂：Decap，Dynasolve 165，Dynasolve 185，Dynasolve 2000，Dynasolve 750，Dynasolve M-35 硅胶溶剂：Dynasolve 210，Dynasolve 218，Dynasolve 220，Dynasolve 225，Dynasolve 230，Dynasolve M-10 涂层去除和清洗剂：DynaFlex Coating，DynaFlex Cleaner XL-C，Dynasolve Ink Buster，Dynasolve CU-5 Dynasolve CU-6，Dynasolve 180 其他溶剂：Citru-Dyn，Dynasolve 100，Dynasolve 185，Dynasolve 218 ，Dynasolve 699，Dynasolve 2000 ，Dynasolve 711 ，Dynasolve 750，Dynasolve CU-5，Dynasolve CU-7，Dynasolve CU-9，Dynasolve M-10 ，Dynasolve Mold Cleaner 1000，Dynasolve M-35，Dynasolve SF-30 Fluid 微电子行业溶剂：FlipStrip ，Dynastrip DL88，Dynastrip 7000，Dynastrip 7000T，Dynastrip 7010T，Dynastrip 7100，Dynastrip 7520，Dynastrip 7700，Dynasolve FS8520，Dynasolve FS8320
更多的Dynaloy (图)产品，Dynaloy (图)价格咨询，Dynaloy (图)产品样本索取，可以直接联系本公司！
Non-flammable version of 220
Dynasolve M-10 Y Excellent for uncured silicones
丙烯酸树脂去除Acrylics Remover
Dynasolve 100 Y Y Y Y Y Y Essentially non-corrosive
Dynasolve 699 Y Y Y Y Y Y Good for stripping powder coatings
To Remove: REACTIVE ADHESIVES
Dynaflake Y Powdered roller cleaner
Dynasolve 2000 Y Y Y Y Y Y Y Removes variety of polymers
Dynasolve 750 Y Y Y Very effective when heated
Dynasolve CU-6 Y Y Y Removes cured PUR adhesive
To Remove: OTHER MATERIALS
Cyanoacrylates: Dynasolve M-35 Y Y Y Y Y Safe alternative to acetone & IPA
Polyimides: Dynasolve CU-7 Y For the fiber optics industry
Polysulfides: Dynasolve 200 Y Good for aircraft fuel tanks
详细说明：
DYNASOLVE CU-7 树脂溶解剂，电子溶解剂
Dynasolve CU-7 is a safer solvent used for removing polyimide coatings. It is used extensively in the fiber
optics industry.
General
Dynasolve CU-7 is a high flash point, proprietary solvent system designed to remove polyimide coatings from
various substrates. The product is a non-chlorinated, non-carcinogenic, non-ozone depleting solvent.
Dynasolve CU-7 can be used for extended periods without decomposition.
Applications
1. Removal of polyimide coatings from fiber optics.
2. Removal of polyimide coatings from semiconductor wafers.
3. Removal of polyimide coatings from advanced composites and various metals.
Specifications
Color: Water white
Specific Gravity: 1.03
Boiling Point: >392oF
Flash Point: 204°F (Lowest flashing component)
Directions For Use
1. Immerse material with polyimide coating into a glass or metal container, preferably stainless steel.
2. Heat for 10 minutes – 2 hours at 180-380oF. Polyimide films can differ greatly in both composition and
degree of curing and therefore a very broad parameter recommendation is required.
3. Use of ultrasonic cleaners or mechanical mixing of the solvent will speed up the removal rate.
4. The solvent works by breaking the bond between the polyimide and the substrate permitting removal of the
polyimide as a film.
5. Rinse substrate with alcohol or water and dry.
Caution and Warnings
Dynasolve CU-7 contains powerful organic solvents. It is harmful if inhaled or swallowed. Avoid breathing
vapors or mist. Keep away from heat and flame. Avoid contact with eyes and skin. Wear gloves, safety
goggles, and protective clothing when handling. Use with adequate ventilation. Refer to MSDS before use, for
disposal, or additional safe handling.
The information in this sheet is based upon our own research and is considered accurate. However, we make no warranty either Last Revised By: Chris Flack
expressed or implied regarding accuracy and results to be obtained, because operating conditions of users are beyond our control. Last Revision Date: 06/15/04
6445 Olivia Lane ●Indianapolis, Indiana 46226 USA ●Tel 800.669.5709 & 317.788.5694 ● Fax 800.671.9583 & 317.788.5690
