Features

• SATA 6Gb/s interface
• iSMART disk health monitoring
• Intelligent error recovery system
• Excellent data transfer speed
• Zero mechanical interference
• Anti-vibration mechanical design
• Built-in Pin7 VCC

 

Overview

Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-MH 3ME is designed as the smallest form factor size that could enhance compatibility with various design applications. Particularly the 7th pin of standard SATA 7pin connector can optionally be the built-in power VCC pin.

Innodisk SATADOM-MH 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

 

Specifications

 

Availability

Model Name                                           SATADOM-MH 3ME

Interface                                              SATA III 6.0 Gb/s

Type                                                  Horizontal

Flash Type                                             MLC

Capacity                                               8GB~128GB

Max. Channels                                          2

Sequential R/W (MB/sec, max.)                           300 / 150

Max. Power Consumption                                2A (5V x 400mA )

Thermal Sensor                                         Wide Temp. only

H/W Write Protect                                       N

Pin7 Power                                              Y

ATA Security                                             Y

S.M.A.R.T.                                               Y

Dimension (WxLxH/mm)                                  40.0 x 30 x 9.0

Vibration                                                20G@7~2000Hz

Shock                                                   1500G@0.5ms

MTBF                                                   >3 million hours

Storage Temperature                                     -55°C ~ +95°C

Operation Temperature                                   Standard Grade: 0°C ~ +70°C;
Industrial Grade: -40°C ~ +85°C​