Features
- SATA
6Gb/s interface
- iSMART
disk health monitoring
- Intelligent
error recovery system
- Excellent
data transfer speed
- Write
protection security
- Zero
mechanical interference
- Anti-vibration
mechanical design
Overview
Innodisk
SATADOM-ML 3SE is designed as the standard SATA 7 pin connector with SATA
interface, and supports SATA III standard (6.0Gb/s) with excellent performance.
Regarding of mechanical interference, Innodisk SATADOM-ML 3SE absolutely
replaces the traditional hard disk and makes personal computer, in any field,
smaller and easier.
Innodisk SATADOM-ML 3SE effectively reduces the booting time of operation
system and the power consumption is less than hard disk drive (HDD), and
complies with ATA protocol, no additional drives are required, and can be
configured as a boot device or data storage device.
Specifications
Availability
Model Name SATADOM-ML
3SE
Interface SATA
III 6.0 Gb/s
Type Vertical
Flash Type SLC
Capacity 8GB~64GB
Max. Channels 4
Sequential R/W (MB/sec, max.) 490 / 250
Max. Power Consumption 2W (5V x 400mA )
Thermal Sensor Wide Temp.
only
H/W Write Protect Y
Pin7 Power Y
ATA Security Y
S.M.A.R.T. Y
Dimension (WxLxH/mm) 35.5 X 30 X 9.5
Vibration 20G@7~2000Hz
Shock 1500G@0.5ms
MTBF >3
million hours
Storage Temperature -55°C ~ +95°C
Operation Temperature Standard Grade: 0°C ~ +70°C;
Industrial Grade: -40°C ~ +85°C