Features

• SATA 6Gb/s interface
• SMART disk health monitoring
• Intelligent error recovery system
• Excellent data transfer speed
• Dram buffer
• Write protection security
• Zero mechanical interference
• Anti-vibration mechanical design

 

Overview

 

Innodisk SATADOM-ML 3SE-P is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, Innodisk SATADOM-ML 3SE-P absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk SATADOM-ML 3SE-P effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

 

 

Specifications

 

Availability

Model Name                                     SATADOM-ML 3SE-P

Interface                                        SATA III 6.0 Gb/s

Type                                            Vertical

Flash Type                                       SLC

Capacity                                         4GB~64GB

Max. Channels                                    4

Sequential R/W (MB/sec, max.)                     480 / 240

Max. Power Consumption                          2W (5V x 400mA )

Thermal Sensor                                   Wide Temp. only

H/W Write Protect                                 Y

Pin7 Power                                       Y

ATA Security                                      Y

S.M.A.R.T.                                        Y

Dimension (WxLxH/mm)                            35.5 X 30 X 9.5

Vibration                                          20G@7~2000Hz

Shock                                             1500G@0.5ms

MTBF                                             >3 million hours

Storage Temperature                               -55°C ~ +95°C

Operation Temperature                             Standard Grade: 0°C ~ +70°C;
Industrial Grade: -40°C ~ +85°C