Industrial CPLD + SDRAM 7-inch touch display solution provides products
Super anti-interference, do not crash spike SSD1963 and RA8875
8080 Timing 16bit parallel bus interface, resolution 800 × 480, 16M color display panel, integrated 8-inch display (memory could ever be used as extended memory). Inside the module using CPLD + SDRAM mode to drive RGB interface display, no further initialization, the bus interface and conversion between RGB interface also provides a range of useful features, details, please refer to the following register descriptions and Demo program.
Support for 51, AVR, STM32 microcontroller and other types of direct drive
Advantages:
Super stability
Job stability of the module with super anti-jamming capability , far beyond driven solutions on the market SSD1963 , SSD1963 interference poor, black and white with crash risk .
Speed and
simplicity
This module provides 8 memory can write data to achieve the background , a command instantly switch full screen display data , far beyond the market RA8875 driver program.
Eliminating the need for a general need cumbersome TFT controller initialization code , without initialization , just need to do a reset operation can begin work . Only need to use at least five stacker instruction can operate normally. Greatly simplifies the code , reducing the difficulty of debugging and error probability .
Fast response , can achieve 200ns read and write cycles . Fastest achieve 13 frames in full screen refresh rate , integrated 8MB SDRAM display buffer corresponding to 8 . Showing page register read and write page register set independently , the currently displayed page and the page can be read different pages , facilitate the achievement of the background written, full page fast switching.
Show effects:
TFT driver timing and circuit design have been optimized to ensure accurate color reduction, display a stable , flicker or eliminate channeling color , and provides LED backlight driver , brightness from 0 ( closed ) to 16 ( full ) between regulation.
寄存器列表:
CS | RS | DATA[15:0] | WR | RD | 功能 |
0 | 0 | 0x0001 | 0 | × | 地址指向背光亮度寄存器 |
0 | 1 | 0 – 16 | 0 | × | 背光亮度值(默认:0) |
|
|
|
|
|
|
0 | 0 | 0x0002 | 0 | × | 地址指向起始行地址寄存器 |
0 | 1 | 0 – 480 | 0 | × | 写入9位的起始行地址 |
|
|
|
|
|
|
0 | 0 | 0x0003 | 0 | × | 地址指向起始列地址寄存器 |
0 | 1 | 0 – 800 | 0 | × | 写入10位的起始列地址 |
|
|
|
|
|
|
0 | 0 | 0x0006 | 0 | × | 地址指向结束行地址寄存器 |
0 | 1 | 0 – 800 | 0 | × | 写入9位的结束行地址 |
|
|
|
|
|
|
0 | 0 | 0x0007 | 0 | × | 地址指向结束列地址寄存器 |
0 | 1 | 0 – 800 | 0 | × | 写入10位的结束列地址 |
|
|
|
|
|
|
0 | 0 | 0x0004 | 0 | × | 显示页寄存器 |
0 | 1 | 0 –最大页 | 0 | × | 写入(设置)被显示页的页地址(上电默认为第0页) |
|
|
|
|
|
|
0 | 0 | 0x0005 | 0 | × | 读写页寄存器 |
0 | 1 | 0 –最大页 | 0 | × | 写入(设置)当前读写页的页地址(上电默认为第0页) |
|
|
|
|
|
|
0 | 0 | 0x000B | 0 | × | 休眠状态寄存器 |
0 | 1 | 0x0000–0x0001 | 0 | × | 0x0001-进入休眠 (进入休眠后只要任意发一条读写命令,即可退出休眠状态。) |
|
|
|
|
|
|
0 | 0 | 0x000C | 0 | × | 显示状态选择寄存器 |
0 | 1 | 0x0000–0x000F | 0 | × | Bit0:U/D(屏幕上下翻转显示) Bit1:L/R(屏幕左右翻转显示) Bit[3:2]:0(正常显示) Bit[3:2]:2(液晶屏自检模式) |
|
|
|