英国GRIMM格林进口不锈钢磁力泵 UK GRIMM Stainless steel magnetic pump
英国GRIMM格林进口不锈钢磁力泵概述:
进口不锈钢磁力驱动泵(简称磁力泵)是将永磁联轴器的工作原理应用于离心泵的新产品，设计合理，工艺先进、具有全密封、无泄漏、耐腐蚀等特点，其性能达到英国格林同类产品的先进水平。
进口不锈钢磁力泵由泵、磁力传动器、电动机三部分组成。关键部件磁力传动器由外磁转子、内磁转子及不导磁的隔离套组成。当电动机带动外磁转子旋转时，磁场能穿透空气隙和非磁性物质，带动与叶轮相连的内磁转子作同步旋转，实现动力的无接触传递，将动密封转化为静密封。
进口不锈钢磁力泵以静密封取代动密封，使泵的过流部件处于完全密封状态，彻底解决了其他泵机械密封无法避免的跑、冒、滴之弊病。磁力泵选用耐腐蚀、高强度的工程塑料、钢玉陶瓷、不锈钢等作为制造材料，因此它具有良好的抗腐蚀性能，并可以使被输送介质免受污染。
英国GRIMM格林进口不锈钢磁力泵特点:
进口不锈钢磁力泵过流部份采用全不锈钢材料，对有机酸，有机化合物，碱、中性溶液和多种气体都有良好的耐腐性，双螺旋槽碳石墨轴承和硬质合金轴套的磨合，具有较强的耐磨性，保证了产品的寿命，是无泄漏输送腐蚀性介质的理想泵。
英国GRIMM格林进口不锈钢磁力泵技术参数:
流 量： 1.8-200m3/h
扬 程： 8m-50m
进出口径： 进口直径：16~125mm
出口直径：12~100mm
汽蚀余量： 3.2-6m
转 速： 2900r/m
电机功率： 0.18~90kw
适用介质： 有机酸，有机化合物，碱、中性溶液和多种气体
电 压： 220/380V
材 质： 304、316、316L
英国GRIMM格林进口不锈钢磁力泵用途:
进口不锈钢磁力泵适用于石油、化工、制药、冶炼、电镀、环保、食品、影视洗印、水处理、国防等行业，是输送易燃、易爆、挥发、有毒、稀有贵重液体和各种腐蚀性液体的理想设备。适用于输送吸入压力不大于0.2MPa，zui大工作压力1.6MPa，温度不超过100℃，密度不大于1600kg/m3，粘度不大于30×10-6m2/S的不含硬颗粒和纤维的液体。
UK GRIMM Stainless steel magnetic pump summary:
Imported stainless steel magnetic drive pump (magnetic pump) is a new product, the working principle of permanent magnet coupling used in centrifugal pump has reasonable design, advanced technology, full seal, no leakage, corrosion resistance, and its performance have reached the advanced level of similar products in Britain Green.
Imported stainless steel pump consists of a pump, magnetic actuators, motors of three parts. Key components of magnetic actuator by the external magnetic rotor sleeve, inner magnetic rotor and non magnetic components. When the motor drives the outer magnetic rotor, the magnetic field can penetrate the air gap and non-magnetic material, driven by the magnetic rotor and impeller connected for synchronous rotation, to achieve non-contact power transmission, the dynamic seal into static seal.
Imported stainless steel magnetic pump to static seal instead of dynamic seal, so that the flow of pump components in a fully sealed state, completely solved the other pump mechanical seals can not avoid running, taking, and dropping defects. Corrosion resistance, high intensity magnetic pump selection of engineering plastics, corundum ceramic, stainless steel and other materials for manufacturing, so it has good corrosion resistance, and can be transported from the contaminated medium.
UK GRIMM Stainless steel magnetic pump characteristic:
The wet parts made of full stainless steel material imports of stainless steel pump, organic acid, organic compound, alkali, neutral solution and a variety of gas has good corrosion resistance, double helix carbon graphite bearing and hard alloy sleeve running, high wearing resistance, ensures the product is the ideal life, no leakage pump for transporting corrosive medium.
UK GRIMM Stainless steel magnetic pump parameters:
Flow rate: 1.8-200m3/h
Lift: 8m-50m
Inlet and outlet diameter: Inlet diameter: 16~125mm
Outlet diameter: 12~100mm
Cavitation: 3.2-6m
Speed: 2900r/m
Motor power: 0.18~90kw
Applicable medium: organic acid, organic compound, alkali, neutral solution and various gases
Voltage: 220/380V
Material: 304, 316, 316L
UK GRIMM Stainless steel magnetic pump purpose:
Imported stainless steel pump is suitable for the industries of petroleum, chemical, pharmaceutical, metallurgy, electroplating, environmental protection, food, water treatment, film and printing photos, national defense, transportation is inflammable and explosive, volatile, toxic, rare and precious liquid and all kinds of corrosive liquid ideal equipment. Apply to conveying suction pressure is not greater than 0.2MPa, the maximum working pressure 1.6MPa, the temperature is not more than 100℃, density is not greater than 1600kg/m3, viscosity is not more than 30 * 10-6m2/S of non hard particles and fibers of liquid.
