【代理商SABIC Innovative Plastics GELOY XP4025 PC+ASA】价格_厂家

代理商SABIC Innovative Plastics GELOY XP4025 PC+ASA

不限

￥36000

中国东莞

产品属性

图文详情

品牌推荐

品牌/厂家

沙伯基础创新/SABIC

牌号

XP4025

类型

正牌料

熔体流动速率

7.0g/10min

密度

1.06g/cm3

拉伸强度

34kg/cm2

弯曲强度

58kg/cm2

缺口冲击强度

41kg.cm/cm

洛氏硬度

86HR

成型收缩率

0.0050 - 0.0070%

断裂伸长率

40%

热变形温度

87℃

脆化温度

99℃

维卡软化点

194°F

包装规格

25KG

产地

美国沙伯基础

沙伯基础创新塑料 SABIC Innovative Plastics PC+ASA GELOY XP4025.ASA+PC混合。抗寒耐热的,注射级。

GELOY ™ Resin XP4025

| British

| Metric

| PDF

Americas: COMMERCIAL

Available in a wide range of colors and is recommended for unpainted exterior applications.

Property

TYPICAL PROPERTIES (1)
MECHANICAL	Value	Unit	Standard
Tensile Stress, yld, Type I, 50 mm/min	600	kgf/cm²	ASTM D 638
Tensile Strain, brk, Type I, 50 mm/min	25	%	ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	890	kgf/cm²	ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span	26300	kgf/cm²	ASTM D 790
Hardness, Rockwell R	114	-	ASTM D 785
Tensile Stress, yield, 50 mm/min	58	MPa	ISO 527
Tensile Stress, break, 50 mm/min	44	MPa	ISO 527
Tensile Strain, yield, 50 mm/min	4.1	%	ISO 527
Tensile Strain, break, 50 mm/min	64	%	ISO 527
Tensile Modulus, 1 mm/min	2500	MPa	ISO 527
Flexural Stress, yield, 2 mm/min	75	MPa	ISO 178
Flexural Modulus, 2 mm/min	2500	MPa	ISO 178
IMPACT	Value	Unit	Standard
Izod Impact, notched, 23°C	17	cm-kgf/cm	ASTM D 256
Izod Impact, notched, -30°C	6	cm-kgf/cm	ASTM D 256
Instrumented Impact Total Energy, 23°C	397	cm-kgf	ASTM D 3763
Instrumented Impact Total Energy, -30°C	345	cm-kgf	ASTM D 3763
Izod Impact, notched 80104 +23°C	21	kJ/m²	ISO 180/1A
Izod Impact, notched 80104 -30°C	5	kJ/m²	ISO 180/1A
Charpy 23°C, V-notch Edgew 80104 sp=62mm	37	kJ/m²	ISO 179/1eA
THERMAL	Value	Unit	Standard
HDT, 0.45 MPa, 3.2 mm, unannealed	102	°C	ASTM D 648
HDT, 1.82 MPa, 6.4 mm, unannealed	90	°C	ASTM D 648
CTE, -20°C to 150°C, flow	7.2E-05	1/°C	ASTM E 831
CTE, -20°C to 150°C, xflow	7.2E-05	1/°C	ASTM E 831
Thermal Conductivity	0.25	W/m-°C	ASTM C 177
Vicat Softening Temp, Rate B/50	109	°C	ISO 306
HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm	107	°C	ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80104 sp=64mm	93	°C	ISO 75/Af
Relative Temp Index, Elec	50	°C	UL 746B
Relative Temp Index, Mech w/impact	50	°C	UL 746B
Relative Temp Index, Mech w/o impact	50	°C	UL 746B
PHYSICAL	Value	Unit	Standard
Specific Gravity	1.14	-	ASTM D 792
Water Absorption, 24 hours	0.24	%	ASTM D 570
Mold Shrinkage, flow, 3.2 mm (5)	0.5 - 0.7	%	SABIC Method
Mold Shrinkage, xflow, 3.2 mm (5)	0.5 - 0.7	%	SABIC Method
Melt Flow Rate, 220°C/10.0 kgf	6.7	g/10 min	ASTM D 1238
Melt Flow Rate, 260°C/5.0 kgf	18	g/10 min	ASTM D 1238
Melt Flow Rate, 280°C/3.8 kgf	31	g/10 min	ASTM D 1238
OPTICAL	Value	Unit	Standard
Gloss, untextured, 60 degrees	90	-	ASTM D 523
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Recognized, 94HB Flame Class Rating (3)	1.47	mm	UL 94

Source GMD, last updated:2000/01/05

Processing

• May be used in co-extrusion or monolayer.

Parameter
Injection Molding	Value	Unit
Drying Temperature	90 - 100	°C
Drying Time	3 - 4	hrs
Drying Time (Cumulative)	8	hrs
Maximum Moisture Content	0.04	%
Melt Temperature	255 - 270	°C
Nozzle Temperature	240 - 255	°C
Front - Zone 3 Temperature	245 - 260	°C
Middle - Zone 2 Temperature	240 - 255	°C
Rear - Zone 1 Temperature	230 - 250	°C
Mold Temperature	55 - 70	°C
Back Pressure	0.3 - 1	MPa
Screw Speed	30 - 80	rpm
Shot to Cylinder Size	40 - 80	%
Vent Depth	0.038 - 0.076	mm

Parameter
Sheet Extrusion	Value	Unit
Drying Temperature	90 - 100	°C
Drying Time	3 - 4	hrs
Drying Time (Cumulative)	8	hrs
Minimum Moisture Content	0.04	%
Melt Temperature	255 - 270	°C
Barrel - Zone 1 Temperature	220 - 230	°C
Barrel - Zone 2 Temperature	230 - 245	°C
Barrel - Zone 3 Temperature	245 - 255	°C
Barrel - Zone 4 Temperature	255 - 265	°C
Adapter Temperature	255 - 265	°C
Die Temperature	255 - 265	°C
Roll Stack Temp - Top	100 - 120	°C
Roll Stack Temp - Middle	95 - 110	°C
Roll Stack Temp - Bottom	75 - 90	°C

Source GMD, last updated:2000/01/05

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.

PLEASE CONTACT US FOR AVAILABILITY IN YOUR REGION.

Compare	Contact Us
	CR
	Grades	Description
	CR7020	ASA copolymer. Profile/sheet coextrusion over ABS. Excellent weatherability, good flow/aesthetics and high impact. Datasheet Product Data: Engineering Design Data Auto Data:
	CR7500	ASA, Weatherable, Injection Molding Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification \| Color Specification
	CR7520	ASA copolymer. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification \| Color Specification
	GELOY™ Resin
	Grades	Description
	CR3020	ASA, Weatherable, Extrusion Grade, Datasheet Product Data: Auto Data:
	CR8510	ASA, Improved flow/impact balance. Improved UV resistance Datasheet Product Data: Auto Data:
	EXGY0058	ASA+PC, High Flow CL and BR free FR Blend Datasheet Product Data: Auto Data:
	EXGY0071	Xtreme Weatherable High Heat ASA with VisualFx Datasheet Product Data: Auto Data:
	FXW710SK	ASA, Lubricants, Light stabilized, Opaque, Weatherable, Datasheet Product Data: Auto Data:
	FXW751SK	ASA+PC with VisualFx UV-Stabilizer, UV-Stabilized, Weatherable, High Heat, High Impact Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification \| Color Specification
	HRA222	UV Resistant, Flame Retardant PC+ASA alloy. Datasheet Product Data: Auto Data:
	HRA222F	UV Resistant, Flame Retardant PC+ASA alloy. Datasheet Product Data: Auto Data:
	XP4025	ASA+PC blend. Weatherable, injection grade. Datasheet Product Data: Engineering Design Data \| Chemical Compatibility Auto Data: Auto Specification \| Color Specification
	XP4034	Weatherable, injection moldable ASA+PC blend. Datasheet Product Data: Engineering Design Data \| Chemical Compatibility Auto Data: Auto Specification \| Color Specification
	XP4045LG	Weatherable, injection moldable, low gloss ASA+PC blend. Datasheet Product Data: Auto Data:
	XP7550	ASA+PC, Weatherable, Datasheet Product Data: Engineering Design Data Auto Data:

原料辅料、初加工材料 > 橡胶、塑料、树脂 > 通用与工程塑料 > ASA >