TAS液压缩紧盘广泛地应用于风能领域, 在世界著名的风能设备制造商VESTAS,GE,Enercon,Nordex,Siemens,Repower,Suzlon,Gamesa, Acciona Energy都有配套使用.
相关型号如下：SHS115×165 SHS120×165 SHS125×165 SHS125×175 SHS130×175 SHS135×175 SHS135×185 SHS140×185 SHS145×185 SHS140×195 SHS150×195 SHS155×195 SHS150×200 SHS155×200 SHS160×200 SHS160×220 SHS165×220 SHS170×220 SHS170×240 SHS180×240 SHS190×240
SHS230×300 SHS240×300 SHS245×300 SHS240×320 SHS250×320 SHS260×320 SHS250×340 SHS260×340 SHS270×340 SHS270×350 SHS280×350 SHS285×350 SHS280×360 SHS290×360 SHS295×360 SHS300×390 SHS310×390 SHS320×390 SHS330×420 SHS340×420 SHS350×420 SHS340×440 SHS350×440 SHS360×440 SHS360×460 SHS370×460 SHS380×460 SHS380×480 SHS390×480 SHS400×480 SHS400×500 SHS410×500 SHS420×500 SHS430×530 SHS440×530 SHS450×530 SHS450×560 SHS460×560 SHS470×560 SHS470×590 SHS480×590 SHS490×590 SHS500×620 SHS510×620 SHS520×
SHS520×640 SHS530×640 SHS540×640 SHS530×660 SHS540×660 SHS550×660 SHS560×700 SHS580×700 SHS600×700 SHS580×720 SHS600×720 SHS620×720 SHS600×750 SHS620×750 SHS640×750
As fixing elements for friction-locked shaft / hub connections, hydraulic shrink discs have prevailed in many areas of drive technology. Today, thousands of these products are found in the drivelines of wind energy plants and also increasingly in industrial applications for the transmission of large torques. Examples and images from the field of development >> In TAS-Schafer GmbH\'s TAS-SHS products, the basic principle of the mechanical, three-part shrink disc has been retained. This principle has been extensively and frequently tested. Here, the power-transmitting friction surfaces are strictly separated from the hydraulic system, thus preventing these surfaces from being exposed to oil. The great advantage of the hydraulic TAS SHS shrink disc lies in the tremendous time savings during installation. This system can be tensioned at a pressure of between 120 bar and 200 bar, thus considerably reducing the installation time. This time reduction increases exponentially with the diameter of the connection. With larger diameters, e.g. 530 mm, a hydraulic shrink disc is tensed after only a few minutes. This compares to several hours\' tensioning time required for a mechanical shrink disc. The hydraulic pump required for assembly may constitute a stationary unit, e.g. at test stations and assembly areas, but the use of a hydraulic hand pump is also possible. In this way, the system can also be tensioned at difficult-to-reach places. A typical application is the turret of a wind turbine. The dismantling of the TAS-SHS is also supported by the hydraulic system. The time needed, and the physical strain put on engineers and maintenance staff can thus be significantly reduced. Even after a long operating life of several years, when, depending on the site, e.g. seals no longer work, the TAS-SHS shrink disc can be removed like a mechanical shrink disc by loosening the screw connection without further pressurisation.