| TECHNICAL SPECIFICATIONS |
| 适用电池片规格|Cell Type | 156*156mm 两栅线，三栅线，四栅线（整片以及最小 1/10 的切割片）
156*156mm 2BB, 3BB, 4BB（full-size cell and minimum 1/10 cut-cell） |
| 适用电池片厚度|Cell Thickness | 150 – 300 微米 | 150 – 300 micrometers |
| 电池片检测|Cell Inspection | 无|NA |
| 电池片定位|Cell Alignment | 利用机械定位机构进行定位，精度: ±0.25mm
Mechanical alignment, accuracy: ±0.25mm |
| 适用焊带|Applicable Ribbon | 厚度 0.16 – 0.28mm, 宽度 0.9 – 1.8mm
Thickness: 0.16 – 0.28mm, Width: 0.9 – 1.8mm |
| 焊带定位|Ribbon Positioning | 精度: ±0.15mm | Accuracy: ±0.15mm |
| 助焊剂喷涂|Flux | 焊带双面浸润 | Double-side Ribbon infiltration |
| 焊接方式|Soldering Technology | 带有预热系统的非接触式红外焊接
Noncontact infrared soldering with pre-heating system |
| 电池片间距|Cell Spacing | 0 – 4mm 可调 | 0 – 4mm adjustable |
| 单串长度|String Length | 最多 12 片（整片） | Max 12 Cells (full-size cell) |
| 下料系统|Unloading System | 电池串自动翻转输出 | Automatic turning &. unloading |
| 动作节拍|Cycle Time | 最高 1,000 节拍/小时 | Up to1,000 cycles/hour |
| 产能|Throughput | 1,000-3600 片/小时 | 1,000-3600 cells/hour |
| 工作噪音|Noise Level | <72dB |
| 焊接碎片率| Breakage Rate | <0.2% |
| 设备利用率|Tool Availability | ~92% |
| 人机界面|HMI | 触摸屏 | Touch panel |
| REQUIREMENTS |
| 外形尺寸|Exterior Dimensions | L*W*H=4.0*1.6*2.0m |
| 重量|Weight | ~2500kg |
| 供电|Power Supply | 三相四线 380VAC, 15KVA | 3P4W, 380VAC, 15KVA |
| 能耗|Energy Consumption | 最大能耗 15KW，平均能耗 9KW | Peak 15KW, Mean 9KW |
| 压缩空气|CDA Supply | 0.5 – 0.8 MPa | 0.5 – 0.8 MPa |
| 压缩空气消耗|CDA Consumption | 0.5m³/分钟 | 0.5m³/min |
