Product overview
Wire rope belt bucket elevator traction components uses high strength steel rope core rubber belt, than the tape type bucket elevator to use more sturdy rubber belt.Wire rope belt bucket elevator to overcome the chain and sprocket meshing drive the dynamic load, more compact than the chain ascension and can run at a rapid speed and achieve higher productivity.Using tao take type charging, centrifugal unloading.Under the condition of same production, tape because of its high working speed and lighter weight, can make the material line load and traction components line load smaller to reduce size, weight of the machine.At the same time, because the belt has good elasticity, flexibility, in the hopper vibration and loading.Because of the high strength steel wire core tape, can make the hoist hoisting height and greatly improve the throughput, vertical, suitable for dry bulk powder materials should be widely in building material, metallurgy, chemical industry, food, electricity and other material.
Product overview
Wire rope belt bucket elevator traction components uses high strength steel rope core rubber belt, than the tape type bucket elevator to use more sturdy rubber belt.Wire rope belt bucket elevator to overcome the chain and sprocket meshing drive the dynamic load, more compact than the chain ascension and can run at a rapid speed and achieve higher productivity.Using tao take type charging, centrifugal unloading.Under the condition of same production, tape because of its high working speed and lighter weight, can make the material line load and traction components line load smaller to reduce size, weight of the machine.At the same time, because the belt has good elasticity, flexibility, in the hopper vibration and loading.Because of the high strength steel wire core tape, can make the hoist hoisting height and greatly improve the throughput, vertical, suitable for dry bulk powder materials should be widely in building material, metallurgy, chemical industry, food, electricity and other material.
1.以输送斗的宽度区分，共有11种规格，最大输送量1325m3/h，最大提升高度<100米，
2.以抗撕裂型钢丝绳芯输送带为牵引件。
3.本机的头部、尾部及中部机壳做了有效的密封处理。
4.传动装置中采用垂直轴减速器和液力偶合器。
5.传动装置中设置了用于设备检修的慢动装置。
6.下部张紧装置采用平衡丝杆式结构形式。
7.下部设有料位计和速度传感器，对提升机的运转情况进行监控。
Features
1.In order to distinguish between the width of bucket，a total of 11 kinds of specifications, the maximum throughput of 1325 m3 / h, the biggest hoisting height < 100 meters,
2. Type in tensile steel cord conveyor belt for traction.
3. The chassis of the machine head, tail and central did effective seal processing.
4. The transmission device with vertical shaft reducer and hydraulic coupling.
5. Transmission device set up in slow motion device for equipment maintenance.
6. The lower tensioning device adopted balance screw type structure.
7. The lower material level meter and speed sensor, to monitor the running status of elevator.
| 输送量m 3 /h | 32 | 70 | 96 | 143 | 206 | 329 | 451 | 686 | |
| 料斗 | 容量VO （l ） | 3 | 7 | 10 | 16 | 25 | 39 | 65 | 102 |
| 斗距t （mm ） | 260 | 325 | 360 | 410 | 460 | 520 | 580 | 650 | |
| 每米长料斗及胶带重（Kg/m ） | 22 | 33 | 33.2 | 42.2 | 62.3 | 78.53 | 106 | 145 | |
| 提升速度m/s | 1.4 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | |
| 最大提升高度 | 100m | ||||||||
| 注：提升高度超过80m 时，需特殊设计。 | |||||||||
1.以输送斗的宽度区分，共有11种规格，最大输送量1325m3/h，最大提升高度<100米，
2.以抗撕裂型钢丝绳芯输送带为牵引件。
3.本机的头部、尾部及中部机壳做了有效的密封处理。
4.传动装置中采用垂直轴减速器和液力偶合器。
5.传动装置中设置了用于设备检修的慢动装置。
6.下部张紧装置采用平衡丝杆式结构形式。
7.下部设有料位计和速度传感器，对提升机的运转情况进行监控。
Features
1.In order to distinguish between the width of bucket，a total of 11 kinds of specifications, the maximum throughput of 1325 m3 / h, the biggest hoisting height < 100 meters,
2. Type in tensile steel cord conveyor belt for traction.
3. The chassis of the machine head, tail and central did effective seal processing.
4. The transmission device with vertical shaft reducer and hydraulic coupling.
5. Transmission device set up in slow motion device for equipment maintenance.
6. The lower tensioning device adopted balance screw type structure.
7. The lower material level meter and speed sensor, to monitor the running status of elevator.
Product overview
Wire rope belt bucket elevator traction components uses high strength steel rope core rubber belt, than the tape type bucket elevator to use more sturdy rubber belt.Wire rope belt bucket elevator to overcome the chain and sprocket meshing drive the dynamic load, more compact than the chain ascension and can run at a rapid speed and achieve higher productivity.Using tao take type charging, centrifugal unloading.Under the condition of same production, tape because of its high working speed and lighter weight, can make the material line load and traction components line load smaller to reduce size, weight of the machine.At the same time, because the belt has good elasticity, flexibility, in the hopper vibration and loading.Because of the high strength steel wire core tape, can make the hoist hoisting height and greatly improve the throughput, vertical, suitable for dry bulk powder materials should be widely in building material, metallurgy, chemical industry, food, electricity and other material.
1.以输送斗的宽度区分，共有11种规格，最大输送量1325m3/h，最大提升高度<100米，
2.以抗撕裂型钢丝绳芯输送带为牵引件。
3.本机的头部、尾部及中部机壳做了有效的密封处理。
4.传动装置中采用垂直轴减速器和液力偶合器。
5.传动装置中设置了用于设备检修的慢动装置。
6.下部张紧装置采用平衡丝杆式结构形式。
7.下部设有料位计和速度传感器，对提升机的运转情况进行监控。
Features
1.In order to distinguish between the width of bucket，a total of 11 kinds of specifications, the maximum throughput of 1325 m3 / h, the biggest hoisting height < 100 meters,
2. Type in tensile steel cord conveyor belt for traction.
3. The chassis of the machine head, tail and central did effective seal processing.
4. The transmission device with vertical shaft reducer and hydraulic coupling.
5. Transmission device set up in slow motion device for equipment maintenance.
6. The lower tensioning device adopted balance screw type structure.
7. The lower material level meter and speed sensor, to monitor the running status of elevator.
| 输送量m 3 /h | 32 | 70 | 96 | 143 | 206 | 329 | 451 | 686 | |
| 料斗 | 容量VO （l ） | 3 | 7 | 10 | 16 | 25 | 39 | 65 | 102 |
| 斗距t （mm ） | 260 | 325 | 360 | 410 | 460 | 520 | 580 | 650 | |
| 每米长料斗及胶带重（Kg/m ） | 22 | 33 | 33.2 | 42.2 | 62.3 | 78.53 | 106 | 145 | |
| 提升速度m/s | 1.4 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | |
| 最大提升高度 | 100m | ||||||||
| 注：提升高度超过80m 时，需特殊设计。 | |||||||||
| 输送量m 3 /h | 32 | 70 | 96 | 143 | 206 | 329 | 451 | 686 | |
| 料斗 | 容量VO （l ） | 3 | 7 | 10 | 16 | 25 | 39 | 65 | 102 |
| 斗距t （mm ） | 260 | 325 | 360 | 410 | 460 | 520 | 580 | 650 | |
| 每米长料斗及胶带重（Kg/m ） | 22 | 33 | 33.2 | 42.2 | 62.3 | 78.53 | 106 | 145 | |
| 提升速度m/s | 1.4 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | |
| 最大提升高度 | 100m | ||||||||
| 注：提升高度超过80m 时，需特殊设计。 | |||||||||
