| Product SKUs |  | | MBD-X10DRL-i -O | - X10DRL-i (Standard Retail Pack)
| | MBD-X10DRL-i -B | |
| | | Physical Stats | | | Form Factor | | | Dimensions | - 12" x 10" (30.48cm x 25.4cm)
|
| | | Processor/Cache | | | CPU | - Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP)
- Dual Socket R3 (LGA 2011)
| | Cores / Cache | - Up to 18 Cores / Up to 45MB Cache
| | System Bus | | | Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
|
| | | System Memory | | | Memory Capacity | - 8x 288-pin DDR4 DIMM slots
- Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
| | Memory Type | - 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
| | DIMM Sizes | - RDIMM: 64GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
|
| | | On-Board Devices | | | Chipset | | | AHCI SATA | - SATA3 (6Gbps); RAID 0, 1, 5, 10
| | SCU SATA | - SATA3 (6Gbps); RAID 0, 1, 5, 10
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
| | Network Controllers | - Intel® i210 Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
| | Video | |
| | | Input / Output | | | SATA | | | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 4x USB 3.0 ports (2 rear + 2 via header)
- 5x USB 2.0 ports (2 rear + 2 via header + 1 Type A)
| | Video | | | Serial Port / Header | - 2x Fast UART 16550 port / 1 Header
| | DOM | - DOM (Disk on Module) power connector
| | TPM | |
|  | | Expansion Slots | | | PCI-Express | - 3 PCI-E 3.0 x8
- 1 PCI-E 3.0 x16
- 1 PCI-E 3.0 x4 (in x8)
- 1 PCI-E 2.0 x4 (in x8)
|
| | | System BIOS | | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.3
- ACPI 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| | | Management | | | Software | - SuperDoctor® 5
- Intel® Node Manager 3.0
- Watch Dog
- IPMI 2.0
| | Power Configurations | - ACPI Power Management
- Power-on mode for AC power recovery
|
| | | PC Health Monitoring | | | Voltage | - Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages.
- 5 Phase-switching voltage regulator
| | FAN | - 8x 4-pin fan headers (up to 8 fans)
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- RoHS, Halogen Free
- Dual Cooling Zones
|
| | | | Operating Environment | | | Operating Temperature Range | - 10°C - 35°C (50°F - 95°F)
| | Non-Operating Temperature Range | - -40°C - 70°C (-40°F - 158°F)
| | Operating Relative Humidity Range | - 8% - 90% (non-condensing)
| | Non-Operating Relative Humidity Range | - 5% - 95% (non-condensing)
|
|
