板状天线特点Feature： ● 高增益 High gain ● 全天候工作 Full day
working ● 优化的尺寸Optimized dimension
板状天线应用Application： ● 2.4 GHz WLAN 系统 2.4 GHz WLAN
system ●公共无线热点覆盖 Public wireless
hot spot coverage ● WiFi 系统 Wi-Fi system
AMXP-2425S-D17L90 电气参数 Electrical Specifications | |
频率范围 Frequency range（MHz） | 2400～2500 |
极化方式 Polarization | ±45º |
增益 Gain（dBi） | 2×16.5 |
半功率波瓣宽度half-power beam width（°） | H:90 V:7 |
前后比Front-to-back ratio（dB） | ≥23 |
输入阻抗Input Impedance（Ω） | 50 |
电压驻波比 VSWR | ≤1.5 |
隔离度Isolation between ports | ≥28dB |
交叉极化鉴别率Cross-polar ratio | ≥15dB@0º ≥10dB@+/-60º |
上第一副瓣抑制Sidelobe suppression for first sidelobe above horizon | 15 dB |
最大功率Maximum input power（W） | 200 |
雷电保护Lightning protection | 直流接地DC Ground |
机械参数Mechanical Specifications | |
接头类型Input connector type | 2-N母头 2-N Female |
天线尺寸Dimensions-mm (Height/Width/Depth) | 1000*114*54 |
包装尺寸Packing size（mm） | 1080*155*145 |
天线重量Antenna weight （kg） | 6 |
天线罩材料Radome material | UPVC |
天线罩颜色Radome color | 灰色Gray |
机械可调倾角Mechanical tilt（°） | 0～10 |
工作温度Operating temperature（°c） | -40～60 |
极限风速Rated Wind Velocity（m/s） | 60 |
抱杆直径Mounting hardware（mm） | ￠35～￠75 |
安装说明Installation Steps
1、把天线上下端锯齿夹码上的螺母、弹垫及平垫拧下，拿下外边的锯齿夹码，将天线有接头的一端朝下，用锯齿夹码抱在外径为￠35～￠75mm的抱杆上，再把拿下的锯齿夹码穿过M8的螺杆，放上平垫、弹垫，然后拧紧螺母。Unscrew and take the screw nuts, the spring washer and flat washer of the sawtooth clamps on the upper and lower sides of the antenna down,then remove the outer sawtooth clamp.Put the end of the antenna with connectors downwards.Then attach the sawtooth clamps to the pole whose outer diameter is ￠35~￠75mm,and place the M8 screws through the sawtooth clamps.Lastly, put on the flat washer and spring washer and screw the nuts tightly afterwards.
2、取下天线接头护盖，连接天线接头，并注意把天线的接头连接端密封好。Take down the connector cover of the antenna,connect the antenna connectors and make sure that you have sealed the connections well.
松开连接两支撑架之间的螺栓，适当地调节天线的倾斜角度，使其接收到的信号为最好，然后拧紧所有螺母。Loosen the bolts that connect the two struts and adjust the inclination of the antenna to the proper position to receive the best signal. At last screw all the nuts tightly.
