油壓機械式機構，高穩定性
Oil Pressure Mechanical Structure
High Stability
*確認拉力計規格是否與主軸夾爪的規格相對應。
* Check
the specification of pull force gauges should
correspond
the specification of spindle clamping unit.
*量測環境溫度需控制在室溫25±1℃內。
*Measuring environment’s temperature
should be controlled within 25 ± 1℃.
*將拉力計及主軸前端錐度部位擦拭乾淨後，夾持拉力計即可。
* Clean
the pull force gauges and front-end taper parts and then
clamp the pull force gauge.
|
|
Adjustment of HSK63A/E pull force
gauge shown on the right. 2)為確保量測數值的正確性，拉力計須在有預拉的情況下使用。 To ensure the accuracy of measurement the
pull force; gauge has to be used in the pre-pull condition. 3)實測拉力：以指針所指外圈之數值X10，即為實測拉力(kg-f) The finger indicated the value of the outer ring X 10; |
|
