瑞达塑料除湿干燥机特点与好处：
塑料制品成型不良，多数源自除湿干燥不良。美国塑料协会建议成型前的塑料必须干燥到0.02%以下的含水率，透明度不佳，浇道粘住、毛边、气泡、银条、流痕、龟裂、尺寸安定性不佳、产生内应力、产品物性强度不足等缺点，其多数不良原因，在于成型前塑料未被充分除湿干燥所致。瑞达除湿干燥供料设备系列是三机一体组合而成。该装置由三部分组成：无热除湿干燥机、保温式干燥料筒和全不锈钢吸料机。吸料机可将原料从干燥料筒输送到成型机，也可将原料由储料筒输送到干燥料筒中。我们根据客户需要可将一种原料输送到两台成型机真空马达和安全过滤集尘器被安装在机器内部。根据不同产品生产的需要，我们可提供除粉型吸料机，以分离原料中的粉末并加以捕集。瑞达塑料除湿干燥送料组合​
Rita in1 camera features and benefits:
Plastic molding bad, most from bad dehumidification drying. Before the American society of plastic suggested molding plastic must be dry to less than 0.02% moisture content, poor transparency, sprue sticking, flash, air bubble, silver bar, flow mark, poor chap, dimension stability, produce the shortcomings such as insufficient intensity of internal stress, product property, the most bad reason, lies in molding plastic before has not been fully dehumidification drying. Rita dehumidification drying material feeding equipment series is a mix of 3 in1. The device consists of three parts: no heat desiccant dryer, heat preservation material drying cylinder and all stainless steel suction machine. Suction feeder can send raw material from drying cylinder to the molding machine, also can send the raw material by the cylinder storage to ? in the drying cylinder