1. 打开电源开关，启动加热台开关，温度设置为80度，1-2分钟左右加热台达到80度后。
2. 把硅胶垫对好孔放到加热台上，屏幕朝下盖住加热台气孔。
3. 按下S1键，将屏幕吸住后，使用钢丝将液晶和盖板分离，取下液晶屏，分离完成。
1.
Turn
on the power switch，Turn on the switch of heated plate,Set the temperature to 80 ℃,After 1-2 minutes ,the temperature of
heated plate reach 80 ℃ .
2.
Put
the silica gel on the heated plate holes to holes,Put downwards the screen onto
the sillica gel.
3.
Press
the S1 key,After the screen being sucked,Separate the LCD from glass by steel
wire,Take off the LCD,The operation steps of screen separation is finished.
公司网站：
联系电话何生：18129815871
阿里巴巴网址：https://wanxinde.1688.com/
