德国pepperl+fuchs倍加福P+F安全栅隔离器KFU8-UFC-EX1.D
一般特性供电输入输出Transfer characteristics指令符合Conformity周围环境机械特性Data for application in connection with Ex-areasInternational approvals
Signal type | 模拟量输出 |
连接器 | Power Rail or terminals 9+, 10- |
额定电压 | 19 ... 30 V DC |
纹波 | ≤ 10 % |
额定电流 | ≤ 30 mA |
功耗 | ≤ 600 mW |
功耗 | ≤ 700 mW |
连接器 | terminals 5-, 6+ |
输入信号 | 4 ... 20 mA limited to approx. 30 mA |
电压降 | depending on switch configuration open loop voltage of the control system < 23 V: approx. 6 V at 20 mA open loop voltage of the control system < 27 V: approx. 10 V at 20 mA |
输入电阻 | > 100 kΩ, with field wiring open |
连接器 | 端子 1+,2- |
电流 | 4 ... 20 mA |
负载 | 0 ... 650 Ω |
电压 | ≥ 13 V at 20 mA |
纹波 | 20 mV rms |
偏差 | at 20 °C (68 °F), 0/4 ... 20 mA ≤ ± 0.1 % incl. non-linearity and hysteresis |
频率范围 | field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB) |
上升时间 | 10 to 90 % ≤ 100 ms |
电磁兼容性 | |
| Directive 2004/108/EC | EN 61326-1:2006 |
电磁兼容性 | NE 21 |
防护等级 | IEC 60529 |
环境温度 | -20 ... 60 °C (-4 ... 140 °F) |
防护等级 | IP20 |
重量 | approx. 100 g |
外形尺寸 | 12.5 x 114 x 124 mm (0.5 x 4.5 x 4.9 in) , housing type A2 |
安装 | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
EC-类型 鉴定证书 | CESI 06 ATEX 021 , for additional certificates see www.pepperl-fuchs.com |
| 保护型号、类别、组别 | II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC , I (M1) [Ex ia Ma] I |
符合标准 | PF 06 CERT 0973 X |
| Group, category, type of protection, temperature class | II 3G Ex nA IIC T4 Gc |
指令符合 | |
| 94/9/EC 指令 | EN 60079-0:2009, EN 60079-11:2007 , EN 60079-15:2005 , EN 60079-26:2007 , EN 61241-11:2006 , EN 50303:2000 |
FM认证 | |
| 控制图 | 16-533FM-12 (cFMus) |
UL认证 | |
| 控制图 | 16-533FM-12 (cULus) |
IECEx approval | IECEx CES 06.0001 |
| Approved for | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I |