Description:
The OK series transmitter is a cost effective solution in a small package for oxygen measurement and control applications. It is compact, cheap and easy installation and designed to provide thetrained engineers with useful information relating to the concentration of oxygen in non-corrosive gases and non-hazardous area . Its microprocessor based main board can offer accuratelyoutput for trace levels oxygen concentration. It is ideally suited for installed in inert chamber or glove box at normal atmosphere.
Specification:
Model： | OK-101 | OK-201 | OK-301 | ||
Measuring Range： | 0-10 ppm | 0-100ppm | 0-1000 ppm | ||
Sensor Type： | Zirconia Oxygen Sensor | ||||
Accuracy： | ±2% of Span Gas | ||||
Response Time： | Approximately 6 sec. for T95 | ||||
Installation : | KF Flange | ||||
Measuring Type: | Diffusion | ||||
Operating Temperature: | 0° to 45° C (32 ? 113° F) Steady State | ||||
Operating Humidity: | 0?90% Non?condensing | ||||
Operating Pressure | Normal Atmosphere | ||||
Calibration@ 1% v/ min*: | Span/ Zero Gas (2 points) or 3 points | ||||
Analog Output： | 4-20mA or 20-4mA Selectable （0-10V/ 10-0V optional） | ||||
Digital Interface | RS485 for Calibration/ Setting | ||||
Calibration/ Setting Software | Included with RS485 to USB Converter | ||||
Power： | 12VDC(24 VDC optional) | ||||
Power Consumption： | Maximum 2A | ||||
