Product SKUs | | MBD-X10DRG-Q -B | |
| Physical Stats | | Form Factor | | Dimensions | - 15.2" x 13.2" (38.6cm x 33.5cm)
|
| Processor/Cache | | CPU | - Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP **)
- Dual Socket R3 (LGA 2011)
| Cores / Cache | - Up to 22 Cores† / Up to 55MB† Cache
| System Bus | | Note | † BIOS version 2.0 or above is required | Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
|
| System Memory | | Memory Capacity | - 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 1TB ECC RDIMM
| Memory Type | - 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
| DIMM Sizes | - RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
| Memory Voltage | | Error Detection | - Corrects single-bit errors
|
| On-Board Devices | | Chipset | | AHCI SATA | - SATA3 (6Gbps); RAID 0, 1, 5, 10
| SCU SATA | - SATA3 (6Gbps); RAID 0, 1, 5, 10
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
| Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
| Video | |
| Input / Output | | SATA | | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| USB | - 5x USB 3.0 ports (2 rear, 2 via header, 1 Type A)
- 4x USB 2.0 ports (2 rear, 2 via headers)
| Audio | - HD Audio with optical S/PDIF
| Video | | Serial Port / Header | - 2x COM ports (1 rear, 1 Header)
| DOM | - 2x SuperDOM (Disk on Module) ports
| TPM | | Thunderbolt | |
| | | Chassis (Optimized for X10DRG-Q ) | | 4U / Tower Chassis: | | Important Chassis Notes | - To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
| |
| SuperServer(s) with X10DRG-Q | | Model(s) | |
| Expansion Slots | | PCI-Express | - 4x PCI-E 3.0 x16 (double-width) slots
- 2x PCI-E 3.0 x8 (1 in x16) slots
- 1x PCI-E 2.0 x4 (in x8) slot
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
|
| System BIOS | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| BIOS Features | - Plug and Play (PnP)
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- BIOS rescue hot keys
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| Management | | Software | - Intel® Node Manager
- SuperDoctor® 5
- IPMI 2.0
- NMI
- SPM
- SUM
- Watch Dog
| Power Configurations | - ACPI / APM Power Management
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
| PC Health Monitoring | | Voltage | - Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages.
- 6 Phase-switching voltage regulator
| FAN | - 10x 4-pin fan headers (up to 10 fans)
- 10x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
| LED | - CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
- Dual Cooling Zones
|
| | Operating Environment | | Operating Temperature Range | - 10°C - 35°C (50°F - 95°F)
| Non-Operating Temperature Range | - -40°C - 70°C (-40°F - 158°F)
| Operating Relative Humidity Range | - 8% - 90% (non-condensing)
| Non-Operating Relative Humidity Range | - 5% - 95% (non-condensing)
|
|