美国十字弹簧C-Flex轴承型号J-10 J-20 J-30进口磨床轴承
进口轴承，C-FLEX轴承，cflex轴承，J-20轴承，进口磨床轴承。
挠性轴承，十字轴承，弯曲轴承，角度轴承，柔性铰链 Flexural Pivot,C-Flex pivot
bearing,Single end bearing
由于数量多少，价格相差很大，欢迎咨询。
Product Codes:All the Single End Bearings from C-flex
company
Dia. | 1/8 | 5/32 | 3/16 | 1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4 | 1 |
10系列 | A-10 | B-10 | C-10 | D-10 | E-10 | F-10 | G-10 | H-10 | I-10 | J-10 |
20系列 | A-20 | B-20 | C-20 | D-20 | E-20 | F-20 | G-20 | H-20 | I-20 | J-20 |
30系列 | A-30 | B-30 | C-30 | D-30 | E-30 | F-30 | G-30 | H-30 | I-30 | J-30 |
C-Flex Bearings
Single End
Bearing
|
Single End Bearing Bearing Sizes | Product Codes | Torsional Spring Rate | Load (Lc) | Capacity (Lt) | Dia. +0
- 0.0005 | A
± 0.003 | B
min | 1/8 | A-10 | .0003 | 0.95 | 3.80 | .1250 | .200 | .088 | 1/8 | A-20 | .0018 | 8.90 | 12.70 | .1250 | .200 | .088 | 1/8 | A-30 | .0148 | 25.30 | 25.30 | .1250 | .200 | .088 | | | | | | | | | 5/32 | B-10 | .0004 | 1.40 | 5.60 | .1562 | .250 | .114 | 5/32 | B-20 | .0037 | 13.70 | 19.60 | .1562 | .250 | .114 | 5/32 | B-30 | .0296 | 39.30 | 39.30 | .1562 | .250 | .114 | | | | | | | | | 3/16 | C-10 | .0007 | 2.00 | 7.80 | .1875 | .300 | .136 | 3/16 | C-20 | .0060 | 19.50 | 27.90 | .1875 | .300 | .136 | 3/16 | C-30 | .0482 | 55.80 | 55.80 | .1875 | .300 | .136 | | | | | | | | | 1/4 | D-10 | .0018 | 3.60 | 14.20 | .250 | .400 | .184 | 1/4 | D-20 | .0148 | 35.00 | 50.00 | .250 | .400 | .184 | 1/4 | D-30 | .1185 | 100.00 | 100.00 | .250 | .400 | .184 | | | | | | | | | 5/16 | E-10 | .0037 | 5.70 | 22.80 | .3125 | .500 | .232 | 5/16 | E-20 | .0296 | 55.00 | 78.60 | .3125 | .500 | .232 | 5/16 | E-30 | .2367 | 157.10 | 157.10 | .3125 | .500 | .232 | | | | | | | | | 3/8 | F-10 | .0065 | 8.40 | 33.60 | .3750 | .600 | .279 | 3/8 | F-20 | .0482 | 79.10 | 113.00 | .3750 | .600 | .279 | 3/8 | F-30 | .4002 | 226.00 | 226.00 | .3750 | .600 | .279 | | | | | | | | | 1/2 | G-10 | .0148 | 14.40 | 57.40 | .5000 | .800 | .374 | 1/2 | G-20 | .1185 | 140.00 | 200.00 | .5000 | .800 | .374 | 1/2 | G-30 | .9486 | 400.00 | 400.00 | .5000 | .800 | .374 | | | | | | | | | 5/8 | H-10 | .0296 | 23.00 | 92.00 | .6250 | 1.000 | .469 | 5/8 | H-20 | .2367 | 221.10 | 315.80 | .6250 | 1.000 | .469 | 5/8 | H-30 | 1.8940 | 631.50 | 631.50 | .6250 | 1.000 | .469 | | | | | | | | | 3/4 | I-10 | .0482 | 32.40 | 129.40 | .7500 | 1.200 | .564 | 3/4 | I-20 | .4002 | 317.20 | 453.10 | .7500 | 1.200 | .564 | 3/4 | I-30 | 3.2610 | 906.10 | 906.10 | .7500 | 1.200 | .564 | | | | | | | | | 1 | J-10 | .1185 | 59.20 | 236.60 | 1.000 | 1.600 | .764 | 1 | J-20 | .9486 | 566.30 | 809.00 | 1.000 | 1.600 | .764 | 1 | J-30 | 7.8023 | 1616.00 | 1616.00 | 1.000 | 1.600 | .764 |
|
(1) Torsional Spring rates: Lb-In/Degree rates of standard
C-Flex bearings generally fall within +/-10% of these values at zero load.
Contact C-Flex if specific spring rates or closer tolerances are
required. |
(2) Load Capacity: Lt or Lc (Pounds load in tension or
compression) These values are maximum loading (weight or static force) at zero
deflection. Load requirements, angular deflection and cyclic life must be
considered when sizing bearings. Lc is pure radial load creating compressive
stresses in the spring, while Lt is a pure radial load creating tensile
stresses. |
1Lb-In/Degree=6.474 Nm/rad
