应用
（钻, 铣, 磨, 雕刻）机床电主轴 | Applications | Drilling, Milling, Grinding, Engraving | |
外壳夹装尺寸 | 33 mm | Clamping diameter | 33 mm |
马达类型 | 3相异步高速电机 | Motor system | 3 Phase asynchronous motor |
转速范围 | 6.000 – 80.000 min-1 | Speed range | 6,000 – 80,000 rpm |
额定电压 | max. 60 V | Voltage | max. 60 V |
电流 | max. 8 A | Current | max. 8 A |
扭矩 | max. 8,4 Ncm | Torque | max. 8.4 Ncm |
频率 | 100 - 1.333 Hz | Frequency | 100 - 1,333 Hz |
功率 | max. 500 W | Output power | max. 500 W |
重量 | 1,0 kg | Weight | 1.0 kg |
轴承 | 3 x陶瓷轴承, 油脂润滑 | Bearing system | 3 x Hybrid, lifetime lubrication |
防护等级 | IP 55/57 (加密封气) | Protection category | IP 55/57 (with sealing air + optional accessory: sealing cap 2001 2618) |
电机保护 | KTY | Motor protection | KTY |
安装位置 |
| Working position |
|
负载方向 | axial + radial | Load direction | axial + radial |
锥面跳动 | ≤ 1 μm | Run-out (taper) | ≤ 1 μm |
刀具夹持范围 | 至 Ø 4,0 mm | Chuck clamping range | up to Ø 4.0 mm |
换刀方式 | 压缩气 5 - 6 bar (管内经 Ø 4 mm) | Tool change | pneumatic 5 - 6 bar (hose Ø 4 mm) |
冷却系统 | 外夹具冷却 | Cooling system | Cooling via clamping bracket |
| 防水防尘措施 | 密封气 27 Nl/min (管内经 Ø 4 mm) | Protected against dirt | Sealing air 27 l/min@STP (hose outer Ø 4 mm) |
外壳材料 | 不锈钢 | Housing material | Stainless steel |
推荐变频器 | e@syDrive® 4310(IP00)*, 4320(IP00)*, 4425*, 4426,TV4503*,TV4504,TV4506 | Inverter recommendation | e@syDrive® 4310(IP00)*, 4320(IP00)*, 4425*, 4426,TV4503*,TV4504,TV4506 |
| 特性 | 利用 6 bar 压缩气进行锥面清洁 | Highlights | Taper cleaning at 6 bar |
| 保留修改权 | Subject to change without notice |
